铸型搅动细晶铸造与力学性能

基金项目:

“九五”国防重点预研项目

Investigation on mechanical properties of fine grain cast by mould agitation

摘要: 对比研究了高温合金铸型搅动细晶铸造和普通铸造叶轮的力学性能。研究结果表明,细晶铸造显著提高了K418B合金叶轮的室温和高温拉伸以及中温持久性能,并大幅度改善了合金的低周疲劳性能。细晶铸造K418B整体叶轮650℃的低周疲劳寿命为普通铸造的3倍。
- 铸型搅动 /
- 细晶铸造 /
- 普通铸造 /
- 力学性能
Abstract: The mechanical properties of fine grain cast and conventional cast integral turbine wheel were evaluated. The results show that fine grain cast technology improve markedly the mechanical properties of integral turbine wheel including the room and high temperature tensile properties, the rupture-stress properties of mid-temprature. At the same time,the low cycle fatigue(LCF) properties were improved considerably.The LCF life of fine grain cast turbine disk was two times longer than conventional casting at 650℃.
- mould agitation /
- fine grain cast /
- conventional cast /
- mechanical property

[1]	MACLNTYRE CAL A,AGARWAL P NEIL.Development of fine grain cast MAR-M247 axial and radial turbine wheels[A].Advanced Aerospace Materials Technology[M].Warrendale,PA:Society of Automotive Enginees Inc.1984.
[2]	刘国勋.金属学原理[M].北京:冶金工业出版社,1979.
[3]	傅恒志.铸钢和铸造高温合金及熔炼[M].西安:西北工业大学出版社,1985.
[4]	SURESH S.Fatige of materials[M].London:Cambridge University Press,1991.

点击查看大图