原始疲劳质量评定和裂纹扩展方法研究

杨谋存; 聂宏

原始疲劳质量评定和裂纹扩展方法研究

杨谋存¹,
聂宏²

1.
南京工业大学机械与动力工程学院,南京,210009;
2.
南京航空航天大学航空宇航学院,南京,210016

基金项目:

江苏省高校自然科学研究计划项目(09KJB460006);南京工业大学青年教师学术基金重点项目(39702011);江苏省自然科学基金(BK2010556)

详细信息

作者简介:
杨谋存(1979- ),男,博士,副教授,主要从事结构抗疲劳控制技术,(E-mail)young_2004@tom.com.

中图分类号: V215.5⁺2
计量
- 文章访问数: 1672
- HTML全文浏览量: 312
- PDF下载量: 191
- 被引次数: 0
出版历程
- 刊出日期: 2011-10-01

New Assessment Method of Initial Fatigue Quality and Crack Growth Rate

YANG Mou-cun¹,
NIE Hong²

1.
School of Mechanical and Power Engineering Nanjing University of Technology,Nanjing,China,210009;
2.
College of Aerospace Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing,China,210016

摘要

摘要: 在对带有一个铆接孔的试件进行试验研究的基础上,利用性能退化失效曲线,提出了一种新的初始疲劳质量和裂纹扩展速率的确定方法.根据试验结果和理论推导,建立了裂纹扩展长度与加载循环次数的函数关系.在此基础上,估算了EIFS值,并用指数函数拟合方法估计了疲劳裂纹扩展速率.最后通过对临界裂纹尺寸的理论计算验证了新方法的可行性和有效性.
- 性能退化失效 /
- 当量初始缺陷尺寸 /
- 裂纹扩展速率 /
- 耐久性分析 /
- 临界裂纹尺寸
Abstract: How to assess initial fatigue quality and crack growth rate rapidly and economically is the key of durability investigation.At present,experimentation is used to assess durability,which is very costly and time-consuming.Performance degradation curve includes a lot of information about fatigue failure.Based on the tests for specimens with one rivet hole respectirely,a new method of determining initial fatigue quality and crack growth rate with performance degradation curves of specimens are presented in the paper.According to the test results and theoretical derivation,the relationship of crack length with loading cycle is established.Then,the equivalent initial flaw size(EIFS)values are calculated and fatigue crack growth rates are estimated by using exponential fitting technique.The applicability and validity of the method are verified with theoretical computation of fracture limit finally.
- performance degradation failure /
- equivalent initial flaw size(EIFS) /
- crack growth rate /
- durability analysis /
- critical crack size

HTML全文

参考文献(14)

[1]	JAMES W P.Probabilistic fracture mechanics and reliability(1 st Ed)[M].Dordrecht:Martinus Nijhoff Publishers,1987:22-43.
[2]	LIU Y M,MAHADEVAN S.Probabilistic fatigue life prediction using an equivalent initial flaw size distribution[J].International Journal of Fatigue,2009,31(3):476-487.
[3]	YANG J N,MANNING S D.Distribution of equivalent initial flaw size[C]//Proceedings of the annual reliability and maintainability symposium,San Francisco,USA,Jan 22-24,1980.
[4]	WHITE P,MOLENT L,Barter S.Interpreting fatigue test results using a probabilistic fracture approach[J].International Journal of Fatigue,2005,27(7):752-767.
[5]	MOLENT L,SUN Q,GREEN A J.Characterisation of equivalent initial flaw sizes in 7050 aluminium alloy[J].Fatigue and Fracture of Engineering Materials and Structures,2006,29(11):916-937.
[6]	MOREIRA P M G P,MATOS P F P,CASTRO P M S T.Fatigue striation spacing and equivalent initial flaw size in Al 2024-T3 riveted specimens[J].Theoretical and Applied Fracture Mechanics,2005,43(1):89-99.
[7]	FAWAS S A.Equivalent initial flaw size testing and analysis of transport aircraft skin splices[J].Fatigue and Fracture of Engineering Materials and Structures,2000,26(3):279-290.
[8]	周玉辉,康锐.基于退化失效模型的旋转机械寿命预测方法[J].核科学与工程,2009,29(2):146-151.
[9]	张永强,刘琦,周经纶.基于性能退化数据的可靠性评定方法研究[J].飞行器测控学报,2005,24(5),54-58.
[10]	邓爱民,陈循,张春华,等.基于性能退化数据的可靠性评估[J].宇航学报,2006,27(3):546-552.
[11]	赵建印,刘芳.加速退化失效产品可靠性评估方法[J].哈尔滨工业大学学报,2008,40(10):1669-1671.
[12]	SALAWU O S.Detection of structural damage through changes in frequency:a review[J].Engineering Structures,1997,19(9):718-723.
[13]	GANESH SUNDARA RAMAN S,RADHAKRISHNAN V M.On cyclic stress-strain behaviour and low cycle fatigue life[J].Materials and Design,2002,23(3):249-254.
[14]	赵少汴,王忠保.抗疲劳设计-方法与数据[M].北京:机械工业出版社,1997.470.

施引文献

资源附件(0)

访问统计

点击查看大图

计量

文章访问数: 1672
HTML全文浏览量: 312
PDF下载量: 191
被引次数: 0

原始疲劳质量评定和裂纹扩展方法研究

作者简介: 杨谋存(1979- ),男,博士,副教授,主要从事结构抗疲劳控制技术,(E-mail)young_2004@tom.com.

计量

出版历程

New Assessment Method of Initial Fatigue Quality and Crack Growth Rate

计量

出版历程

目录

作者简介:
杨谋存(1979- ),男,博士,副教授,主要从事结构抗疲劳控制技术,(E-mail)young_2004@tom.com.