纳米压痕法测试压痕蠕变的应用研究

高阳 文胜平 王晓慧 潘峰

高阳, 文胜平, 王晓慧, 潘峰. 纳米压痕法测试压痕蠕变的应用研究[J]. 航空材料学报, 2006, 26(3): 148-151.
引用本文: 高阳, 文胜平, 王晓慧, 潘峰. 纳米压痕法测试压痕蠕变的应用研究[J]. 航空材料学报, 2006, 26(3): 148-151.
GAO Yang, WEN Sheng-ping, WANG Xiao-hui, PAN Feng. Investigation on Indentation Creep by Depth Sensing Indentation[J]. Journal of Aeronautical Materials, 2006, 26(3): 148-151.
Citation: GAO Yang, WEN Sheng-ping, WANG Xiao-hui, PAN Feng. Investigation on Indentation Creep by Depth Sensing Indentation[J]. Journal of Aeronautical Materials, 2006, 26(3): 148-151.

纳米压痕法测试压痕蠕变的应用研究

基金项目: 

国家自然科学基金资助(90406024)

详细信息
    作者简介:

    高阳(1968- ),女,博士,高级工程师.

  • 中图分类号: TB302.3;TG146.1

Investigation on Indentation Creep by Depth Sensing Indentation

  • 摘要: 阐述压痕蠕变的研究进展及其测试原理,并且采用纳米压痕仪对Ta,Ni和Ni基高温合金三种金属体材料、BaTiO3陶瓷和Ag/Co多层薄膜进行蠕变实验,分析蠕变应力指数和相应的蠕变机制。

     

  • [1] MAHMUDI R,ROUMINA R,RAEISINIA B.Investigation of stress exponent in the power-lawcreep of Pb-Sb alloys[J].Materials Science and Engineering A,2004,382:15-22.
    [2] NGAN A H W,WANG H T,TANG B,et al.Correcting power-law viscoelastic effects in elastic modulus measurement using depth-sensing indentation[J].International Journal of Solids and Structures,2005,42:1831-1846.
    [3] MA X,YOSHIDA F.Rate-dependent indentation hardness of a power-law creep solder alloy[J].Appl Phys Lett,2003,82:188-190.
    [4] GUIN J P,ROUXEL T,KERYVIN V,et al.Indentation creep of Ge-Se chalcogenide glasses below Tg:Elastic recovery and non-Newtonian flow[J].Journal of Non-Crystalline Solids,2002,298:260-269.
    [5] ZHANG K,WEERTMAN J R.The influence of time,temperature,and grain size on indentation creep in high-purity nanocrystalline and ultrafine grain copper[J].Appl Phys Lett,2004,85:5197-5199.
    [6] YANG S,ZHANG Y W,ZENG K Y.Analysis of nanoindentation creep for polymeric materials[J].J Appl Phys,2004,95:3654-3667.
    [7] LUCAS B N,OLIVER W C.Indentation power-law creep of high-purity indium[J].Metallurgical and Materials Transactions,1999,30:601-610.
    [8] CELLS J P,ROOS J R,VANCOILLE E,et al.Characterization of hard ceramic coatings by nanoindentation[A].Wear of Materials:International Conference on Wear of Materials[C] ,1991.655-658.
    [9] MAYO M J,NIX W D.Micro-indentation study of superplasticity in Pb,Sn,and Sn-38wt% Pb[J].Acta Metall,1988,36:2183-2192.
    [10] MAYO M J,SIEGEL W,NARAYANASAMY A,et al.Mechanical properties of nanophase TiO2 as determined by nanoindentation[J].J Mater Res,1990,5:1073-1082.
    [11] HANNULA S P,STONE D S,LI C Y.Determination of time-dependent plastic properties of metals by indentation load relaxation techniques[J].Mater Res Soc Symp Proc,1985,40:217-224.
    [12] LI X D,BHUSHAN B.A review of nanoindentation continuous stiffness measurement technique and its applications[J].Materials Charaterization,2002,48:11-36.
    [13] LI,W B,HENSHALL J L,HOOPER R M,et al.Mechanisms of indentation creep[J].Acta Matall Mater,1991,39:3099-3110.
    [14] CHANG H,ALTSTETTER C J,AVERBACK R S.Characteristics of nanophase TiAl produced by inert gas condensation[J].J Mater Res,1992,7:2962-2970.
    [15] SHEN B L,ITOI T,YAMASAKI T,et al.Study on laser ig nition of Ni-33.3at% Al power compacts.Indentation creep of nanocrystalline Cu-TiC alloys prepared by mechanical alloying[J].Scripta Materialia,2000,42:893-898.
    [16] RAMAN V,BERRICHE R.Investigation of the creep processes in tin and aluminum using a depth-sensing indentation technique[J].J Mater Res,1992,7 (3):627-638.
    [17] COURTNEY H.Mechanical Behavior of Materials[M].Beijing:Chinese Machine Press.
    [18] 陈吉,汪伟,卢磊,等.纳米压痕法测量Cu的室温蠕变速率敏感指数[J].金属学报,2001,37(11):1179-1183.
    [19] 张建民,徐可为.纳米压痕法测量Cu的室温蠕变速率敏感指数[J].物理学报,2004,53(8):2439-2443.
  • 加载中
计量
  • 文章访问数:  4671
  • HTML全文浏览量:  159
  • PDF下载量:  1222
  • 被引次数: 0
出版历程
  • 收稿日期:  2006-01-30
  • 修回日期:  2006-03-22
  • 刊出日期:  2006-06-01

目录

    /

    返回文章
    返回

    《航空材料学报》关于谨防假冒期刊的郑重声明

    近期,有不法分子冒充《航空材料学报》期刊及官网,谎称提供论文发表服务,发布虚假约稿信息,骗取作者发表费用,为此,本编辑部郑重声明如下:

    1、http://www.hkclxb.cn 为假冒网站,与《航空材料学报》没有任何关系。我刊没有委托任何第三方机构或个人,代表我刊约稿或提供发表服务。

    2、《航空材料学报》为中文期刊,只接收中文文章投稿,目前不刊登英文文章。

    3. 本刊官网是http://jam.biam.ac.cn/,本刊的官方投稿方式为网上投稿(登录官网首页—作者投稿)。如有不明可电话咨询,联系电话是010-62496277。

    敬请广大读者和作者认真识别,谨防上当受骗。