金属基复合材料的强化机制

陈剑锋 武高辉 孙东立 姜龙涛

陈剑锋, 武高辉, 孙东立, 姜龙涛. 金属基复合材料的强化机制[J]. 航空材料学报, 2002, 22(2): 49-53.
引用本文: 陈剑锋, 武高辉, 孙东立, 姜龙涛. 金属基复合材料的强化机制[J]. 航空材料学报, 2002, 22(2): 49-53.
CHEN Jianfeng, WU Gaohui, SUN Dongli, JIANG Longtao. Strengthening mechanisms of metal matrix composites[J]. Journal of Aeronautical Materials, 2002, 22(2): 49-53.
Citation: CHEN Jianfeng, WU Gaohui, SUN Dongli, JIANG Longtao. Strengthening mechanisms of metal matrix composites[J]. Journal of Aeronautical Materials, 2002, 22(2): 49-53.

金属基复合材料的强化机制

基金项目: 

国家自然科学基金资助项目(50071019)

详细信息
    作者简介:

    陈剑锋(1977- ), 男, 硕士研究生.

  • 中图分类号: TB331

Strengthening mechanisms of metal matrix composites

  • 摘要: 复合材料的强化机制和强度预报一直是材料学的研究热点,因为这涉及到材料的组织设计问题。以往的研究对于金属基复合材料的强化机理有很多种说法,而且提出了大量的模型,但迄今为止缺乏一个统一而完善的理论。本文总结分析了近年来有关金属基复合材料的强化机制和一些相关的模型,并指出了这些强化机制的不足和以后的发展趋势。

     

  • [1] 武高辉,赵永春,马森林.亚微米级Al2O3颗粒增强LD2铝合金复合材料的拉伸性能与强化机制[J].复合材料学报,1998,15(3):21-26.
    [2] 魏建锋,宋余九. 颗粒增强纯铝基复合材料的增强机制[J]. 稀有金属材料与工程,1994,23(3):17-22.
    [3] 张力宁,王俊. 颗粒增强金属基复合材料强化机制的探讨[J].东南大学学报,1995,25(4):77-82.
    [4] 克莱茵T W,威瑟斯P J.金属基复合材料导论[M].余永宁,房志刚译.北京:冶金工业出版社,1996.348-350
    [5] LANDIS CHAD M,McMEEKING ROBERT M.A shear-lag model for a broken fiber embedded in a composite with a ductile matrix[J].Composites Science and Technology,1999, 59:447-457.
    [6] NARDONE V C,PREWO K M.On the strength of discontinuous silicon carbide reinforced aluminum composites[J].Scripta Metall,1986,20(1):43-48.
    [7] RAMAKRISHNAN N.An analytical study on the strengthening of particulate reinforced metal matrix composites[J]. Acta mater,1996,44(1):69-77.
    [8] ROATTA A,BOLMARO R E. An Eshelby inclusion-based model for the study of stresses and plastic strain localization in metal composites I: general formulation and its application to round particles[J].Materials Science and Engineering, 1997, A229:182-191.
    [9] ROATTA A,BOLMARO R E.An Eshelby inclusion-based model for the study of stresses and plastic strain localization in metal composites II: fiber reinforcement and lamellar inclusions[J].Materials Science and Engineering,1997,A229:192-202.
    [10] LEGGOE J W,MAMMOLI A A,BUSH M B,et al.Finite element modelling of deformation in particulate reinforced metal matrix composites with random local microstructure variation[J]. Acta mater, 1998, 46(17):6075-6088.
    [11] 樊建中,姚忠凯,李义春,等. 颗粒增强铝基复合材料研究进展[J].材料导报, 1997,11(3):48-51.
    [12] WU Y.LAVERNIA J.Strengthening behavior of particulate reinforced MMCs[J]. Scripta Metall,1992,7(2):173-178.
    [13] EVANS A G,HUTCHINSON J W, McMEEKING R M.Stress-strain behavior of metal matrix composites with discontinuous reinforcements[J].Scripta Metallurgica et Materiala,1991,25:3-8.
    [14] ARSENAULT R J,SHI N.Dislocation due to differences between the coefficients of thermal expansion[J].Materials Science and Engineering,1986,81:175-187.
    [15] ARSENAULT R J,WANG L, FENG C R.Strengthenging of composites due to microstructural changes in the matrix[J]. Acta Metall Mater, 1991,39(1):47 -57.
    [16] SHIBATA SHOICHI,TAYA M,MORI T,et al. Dislocation punching from spherical inclusions in a metal matrix composite[J].Acta metall mater,1992,40(11): 3141-3148.
    [17] DUNAND D C,MORTENSEN A.Dislocation emission at fibers:I,theory of longitudinal punching by thermal stresses[J].Acta Metallurgical et Materialia,1991,39(7):1405-1416.
    [18] TAYA M, MORI T.Dislocations punched-out around a short fiber in a short fiber metal matrix composite subjected to uniform temperature change[J].Acta Metall,1987,35(1):155-162.
    [19] 董尚利,杨德庄,江中浩. 短纤维增强铝基复合材料强化机制评述[J].材料科学与工程, 2000,18(1):121-130.
    [20] IBRAHIM I A,MOHAMED F A,LAVERNIA E J.Particulate reinforced metal matrix composites:a review[J].J Mater Sci,1991,26:1137-1156.
    [21] MILLER W S,HUMPHREYS F J.Strengthening mechanism in particulate metal matrix composites[J].Scripta Metal et Mater,1991,25:33-38.
    [22] 森本启之,岩村宏,安倍睦,等.SiC粒子强化アルミニウム复合材料の离子微细化による强化[J].日本金属学会志,1994,58(8):973-979.
    [23] 吴承建,陈国良,强文江.金属材料学[M].北京:冶金工业出版社,2000.282-306.
    [24] STARINK M J,WANG P,SINCLAIE I,et al.Microstructure and strengthening of Al-Li-Cu-Mg alloys and MMCs: II modelling of yield strength[J]. Acta mater,1999, 47(14):3855-3968.
    [25] MAHON G J,HOWE J M,VASUDEVAN A K.Microstructural development and the effect of inerfacial precipitation on the tensile properties of an aluminum/ silicon-carbide composite[J].Acta metall mater,1990,38(8):1503-1512.
    [26] GOMIERO P,BRECHET Y,LOUCHET F,et al.Microstructure and mechanical properties of 2091 Al-Li alloy -Ⅱ Mechanical properties:Yield stress and work hardening[J]. Acta metall mater,1992,40(4):857.
    [27] 范赋群,王震鸣,嵇醒,等.复合材料进展[M].杨顺林编. 北京:航空工业出版社,1994.17-22.
    [28] 郑茂盛,赵更申,井新利,等.颗粒增强金属基复合材料的协同效应[J]. 材料研究学报,1995,9(suppl):583-586.
    [29] FRIEND C M.The effect of matrix properties on reinforcement in short alumina fibre-aluminum metal matrix composites[J].Journal of Materials Science,1987,22:3005-3010.
    [30] BAXTER WILLIAM J.The strength of metal matrix composites reinforced with randomly oriented discontinuous fibers[J].Metall Trans,1992,23A:3045-3053.
    [31] TERMONIA Y.Tensile strength of discontinuous fibre-reinforced composites[J]. Journal of Materials Science,1990,25:4644-465.
    [32] 赵永春,马森林,武高辉.亚微米级Al2O3p/6061复合材料的显微组织与力学性能[A].见:96中国材料研讨会论文集II:材料设计与加工[M].北京,1996.15-19
  • 加载中
计量
  • 文章访问数:  5399
  • HTML全文浏览量:  224
  • PDF下载量:  1453
  • 被引次数: 0
出版历程
  • 收稿日期:  2001-09-21
  • 修回日期:  2002-01-21
  • 刊出日期:  2002-05-01

目录

    /

    返回文章
    返回

    《航空材料学报》关于谨防假冒期刊的郑重声明

    近期,有不法分子冒充《航空材料学报》期刊及官网,谎称提供论文发表服务,发布虚假约稿信息,骗取作者发表费用,为此,本编辑部郑重声明如下:

    1、http://www.hkclxb.cn 为假冒网站,与《航空材料学报》没有任何关系。我刊没有委托任何第三方机构或个人,代表我刊约稿或提供发表服务。

    2、《航空材料学报》为中文期刊,只接收中文文章投稿,目前不刊登英文文章。

    3. 本刊官网是http://jam.biam.ac.cn/,本刊的官方投稿方式为网上投稿(登录官网首页—作者投稿)。如有不明可电话咨询,联系电话是010-62496277。

    敬请广大读者和作者认真识别,谨防上当受骗。