[1] |
党宁, 赵嘉琪, 南海,等. 退火态ZTi6Al4V铸造钛合金的断裂韧度研究[J].航空材料学报,2012,32 (4): 87-91. (DANG N, ZHAO J Q, NAN H,et al.Fracture toughness of ZTi6Al4V casting titanium alloy under different annealed conditions[J].Journal of Aeronautical Materials,2012,32 (4): 87-91.
|
[2] |
曹晶晶, 陈华辉, 杜飞,等. 助熔剂对原位转化炭纤维/氧化铝复合材料组织结构与性能的影响[J].材料工程,2013(12):54-58. (CAO J J, CHEN H H, DU F,et al.Effect of sintering additives on microstructures and properties of in-situ transformed carbon fiber/alumina composites[J]. Journal of Materials Engineering,2013(12):54-58.
|
[3] |
刘涛, 高怡斐, 李颖,等. GB/T 21143—2007 金属材料准静态断裂韧度的统一试验方法[S]. 北京:中国标准出版社,2008.
|
[4] |
International Organization for Standardization. ISO 12135-2002(E) International standard of unified method of test for the determination of quasistatic fracture toughness[S]. Switzerland: International Organization for Standardization, 2002.
|
[5] |
ASTM International. ASTM E1820-08a Standard test methods for measurement of fracture toughness[S]. Annual Book of ASTM Standards: Vol 301. Philadelphia, PA: American Society for Testing and Materials, 2008.
|
[6] |
姚蘅. ASTM E813—87 JIC断裂韧性试验方法: 节译稿[S]. 北京: 冶金部钢铁研究总院, 1988: 20-37.
|
[7] |
姚蘅, 邓枝生, 邓其源. GB/T 2038—1991金属材料延性断裂韧度JIC试验方法[S]. 北京: 中国标准出版社, 2002: 387-411.
|
[8] |
RICE J R, BOSENGREN G F. Plane strain deformation near a crack tip in a power-law hardening material[J]. Journal of the Mechanics and Physics of Solids, 1968, 16(1): 1-12.
|
[9] |
蔡力勋, 陈洪军, 包陈. 关于断裂力学柔度测试技术的新思考[J]. 核动力工程, 2006 (10):134-138.(CAI L X, CHEN H J, BAO C. The new thought of compliance testing technology about fracture mechanics[J]. Nuclear Power Engineering, 2006 (10):134-138.)
|
[10] |
蔡力勋,包陈,金蕾. 金属材料断裂力学柔度测试技术问题与发展[J]. 中国测试, 2009, 35(1): 9-18.(CAI L X, BAO C, JIN L. Compliance testing technology used for fracture properties of metallic materials :problems and development[J]. China Measurement and Test, 2009, 35(1) : 9-18.)
|
[11] |
金蕾, 蔡力勋. 基于材料断裂韧度测试的COD换算方法研究[J].机械强度, 2010, 32(1):116-120.(JIN L, CAI L X, BAO C. Study on crack open displacement transform formulas based on testing of material fracture toughness[J]. Journal of Mechanical Strength, 2010, 32(1):116-120.)
|
[12] |
包陈, 蔡力勋, 石凯凯. 直通型CT试样COD弹塑性换算研究[J]. 北京科技大学学报, 2011, 33(7): 863-867.(BAO C, CAI L X, SHI K K. Study on crack opening displacement elastic-plastic transform formula for front-force compact tension (FFCT) specimen[J]. Journal of University of Science and Technology Beijing, 2011, 33(7): 863-867.)
|
[13] |
EMST H A, PARIS P C, LANDES J D. Estimations on J-integral and tearing modulus T from a single specimen test record[J]. Fract Mech, ASTM STP 743, American Society for Testing and Materials, 1981: 476-502.
|
[14] |
SHAROBEAM M H, LANDES J D. The load separation criterion and methodology in ductile fracture mechanics[J]. Int J Fract, 1991, 47: 81-104.
|
[15] |
WAINSTAIN J, FRONTINI P M, CASSANELLI A N. J-R curve determination using the load separation parameter Spb method for ductile polymers[J]. Polym Test, 2004, 23: 591.
|
[16] |
HOLLOMON J H. Tensile deformation [J]. Aime Trans, 1945, 12(4): 1-22.
|
[17] |
高素荷. 网格划分密度与有限元求解精度研究[J]. 机械设计, 2007, 27: 161-163.(GAO S H. The theory and practice of high speed raster photography[J]. Mechanical Design, 2007, 27: 161-163.)
|