镁锂合金腐蚀行为研究进展

王保杰 姜春龙 李传强 孙杰 许道奎

王保杰, 姜春龙, 李传强, 孙杰, 许道奎. 镁锂合金腐蚀行为研究进展[J]. 航空材料学报, 2019, 39(1): 1-8. doi: 10.11868/j.issn.1005-5053.2018.001017
引用本文: 王保杰, 姜春龙, 李传强, 孙杰, 许道奎. 镁锂合金腐蚀行为研究进展[J]. 航空材料学报, 2019, 39(1): 1-8. doi: 10.11868/j.issn.1005-5053.2018.001017
Baojie WANG, Chunlong JIANG, Chuanqiang LI, Jie SUN, Daokui XU. Research progress on corrosion behavior of magnesium-lithium alloys[J]. Journal of Aeronautical Materials, 2019, 39(1): 1-8. doi: 10.11868/j.issn.1005-5053.2018.001017
Citation: Baojie WANG, Chunlong JIANG, Chuanqiang LI, Jie SUN, Daokui XU. Research progress on corrosion behavior of magnesium-lithium alloys[J]. Journal of Aeronautical Materials, 2019, 39(1): 1-8. doi: 10.11868/j.issn.1005-5053.2018.001017

镁锂合金腐蚀行为研究进展

doi: 10.11868/j.issn.1005-5053.2018.001017
基金项目: 国家自然科学基金项目(51701129,51871211);沈阳理工大学博士后启动基金(10500010006)
详细信息
    通讯作者:

    王保杰(1980—),女,博士,讲师,研究方向为镁合金腐蚀与防护,(E-mail)bjwang@alum.imr.ac.cn

    许道奎(1980—),男,博士,研究员,研究方向为镁合金使役行为及失效机理,(E-mail)dkxu@imr.ac.cn

  • 中图分类号: TG146.2+2

Research progress on corrosion behavior of magnesium-lithium alloys

  • 摘要: 系统归纳总结了具有不同晶体结构的Mg-Li系合金,即密排六方结构(HCP)型单相镁锂合金、体心立方(BCC)型单相镁锂合金和(HCP+BCC)型双相镁锂合金腐蚀行为(局部腐蚀、腐蚀类型和腐蚀产物等)的研究进展、合金化和加工处理方法对腐蚀性能的影响规律。展望了镁锂合金抗腐蚀性能提升的研究方向,未来镁锂合金腐蚀行为的研究应集中在对表面产物层的结构、有效组分和其随时间的演化规律方面进行深入的研究;同时,需要考虑合金元素的添加对膜层防护效果的影响;此外,还需研究因大塑性变形加工所引起镁锂合金晶体学织构的变化对腐蚀行为的影响。

     

  • 图  2  镁合金表面膜形成原理[73]

    Figure  2.  Schematic illustration of formation of Mg surface film[73]

    图  1  纯镁在0.01 M NaCl溶液浸泡24 h后所形成表面膜 (a)平面形貌;(b)截面形貌[73]

    Figure  1.  Morphologies of surface film formed on pure Mg in 0.01 M NaCl solution after 24 h immersion (a)surface mophology;(b)cross-sectional mophology[73]

    表  1  一些化合物的PBR值[57]

    Table  1.   PBR of some chemical compounds[57]

    Compound PBR
    Li2O 0.57
    MgO 0.8
    LiOH 1.26
    Mg(OH)2 1.80
    Li2CO3 1.35
    MgCO3 2.04
    下载: 导出CSV
  • [1] 刘正, 张奎, 曾小勤. 镁基轻质合金理论基础及其应用[M]. 北京: 机械工业出版社, 2002.

    LIU Z, ZHANG K, ZENG X Q. Theory and applications magnesium-based light alloys[M]. Beijing: Machinery Industry Publishing House, 2002.
    [2] 陈振华. 变形镁合金[M]. 北京: 化学工业出版社, 2005.

    CHEN Z H. Wrought magnesium alloys[M]. Beijing: Chemical Industry Publishing House, 2005.
    [3] 陈振华. 镁合金[M]. 北京: 化学工业出版社, 2004.

    CHEN Z H. Magnesium alloys[M]. Beijing: Chemical Industry Publishing House, 2004.
    [4] 张密林, 埃尔金·F M. 镁锂超轻合金[M]. 北京: 科学出版社, 2010.

    ZHANG M L, ELKIN FM. Magnesium lithium ultra-light alloys[M]. Beijing: Science Publishing House, 2010.
    [5] 李劲风,郑子樵,陶光勇. 超轻Mg-Li合金[J]. 轻合金加工技术,2004,32:35-38 doi: 10.3969/j.issn.1007-7235.2004.10.013

    LI J F,ZHENG Z Q,TAO G Y. Ultralight Mg-Li alloy[J]. Light Alloy Processing Technology,2004,32:35-38.) doi: 10.3969/j.issn.1007-7235.2004.10.013
    [6] RUSSELL A M,CHUMBLEY L S,GANTOVNIK V B. Anomalously high impact fracture toughness in BCC Mg-Li between 4.2K and 77K[J]. Scripta Materialia,1998,39:1663-1667 doi: 10.1016/S1359-6462(98)00379-0
    [7] LI C Q,XU D K,CHEN X B,et al. Composition and microstructure dependent corrosion behaviour of Mg-Li alloys[J]. Electrochimica Acta,2018,260:55-64 doi: 10.1016/j.electacta.2017.11.091
    [8] 董含武,吴耀明,王立民. Mg-Li-RE系合金研究进展[J]. 兵器材料科学与工程,2008,32:88-93 doi: 10.3969/j.issn.1004-244X.2008.06.024

    DONG H W,WU Y M,WANG L M. Research progress on Mg-Li-RE series alloys[J]. Ordnance Material Science and Engineering,2008,32:88-93.) doi: 10.3969/j.issn.1004-244X.2008.06.024
    [9] 乐启炽,崔建忠,李红斌,等. Mg-Li合金研究最新进展及其应用[J]. 材料导报,2003,17(12):1-8 doi: 10.3321/j.issn:1005-023X.2003.11.001

    LE Q C,CUI J Z,LI H B,et al. Recent research progress in Mg-Li alloys and their applications[J]. Materials Review,2003,17(12):1-8.) doi: 10.3321/j.issn:1005-023X.2003.11.001
    [10] 蒋斌,张丁非,彭建,等. Mg-Li超轻合金的研究与应用[J]. 材料导报,2005,19(5):38-41 doi: 10.3321/j.issn:1005-023X.2005.04.011

    JIANG B,ZHANG D F,PENG J,et al. Research and applications of Mg-Li ultra-light alloys[J]. Materials Review,2005,19(5):38-41.) doi: 10.3321/j.issn:1005-023X.2005.04.011
    [11] 刘腾. Mg-Li合金ECAP和室温力学行为[D]. 沈阳: 中国科学院金属研究所, 2004.

    LIU T. ECAP and room temperature mechanical behavior of Mg-Li alloys[D]. Shenyang: Chinese Academy of Sciences, Institute of Metal Research, 2004.
    [12] 王聪. 一种Mg-Li合金的塑形不稳定性现象及其解释[D]. 沈阳: 中国科学院金属研究所, 2006.

    WANG C. Plastics instability of a Mg-Li alloy and its explanation[D]. Shenyang: Chinese Academy of Sciences, Institute of Metal Research, 2006.
    [13] 刘云彦,李家峰,张立功,等. 镁锂合金表面阳极氧化热控膜层制备及性能[J]. 航空材料学报,2018,38(6):36-42

    LIU Y Y,LI J F,ZHANG L G,et al. Process parameters, characteristics and properties of anodic thermal control coating of magnesium-lithium alloy[J]. Journal of Aeronautical Materials,2018,38(6):36-42.)
    [14] 李扬欣,曾小勤. 高强塑积镁稀土合金的研究进展[J]. 航空材料学报,2018,38(4):1-9

    LI Y X,ZENG X Q. A review on Mg-RE alloys with high product of strength and elongation[J]. Journal of Aeronautical Materials,2018,38(4):1-9.)
    [15] 蒋斌,刘文君,董含武,等. 高塑性铸态镁合金研究进展[J]. 航空材料学报,2018,38(4):10-25

    JIANG B,LIU W J,DONG H W,et al. Research progress of as-cast magnesium alloys with high plasticity[J]. Journal of Aeronautical Materials,2018,38(4):10-25.)
    [16] 何阳,袁秋红,罗岚,等. 镁基复合材料研究进展及新思路[J]. 航空材料学报,2018,38(4):26-36

    HE Y,YUAN QH,LUO L,et al. Current study and novel ideas on magnesium matrix composites[J]. Journal of Aeronautical Materials,2018,38(4):26-36.)
    [17] 王荣,乐启炽,王恩刚,等. 铸造压强对Mg-6Zn-1Al-0.5Mn-0.5Ca合金的组织和性能影响[J]. 航空材料学报,2018,38(4):75-81

    WANG R,LE Q C,WANG E G,et al. Effect of pressure on microstructure and mechanical properties of squeeze casting Mg-6Zn-1Al-0.5Mn-0.5Ca alloy[J]. Journal of Aeronautical Materials,2018,38(4):75-81.)
    [18] 陈杰,宋惠,戴宇,等. 镁合金表面冷喷涂420不锈钢/WC-17Co涂层及其耐磨耐蚀性能[J]. 航空材料学报,2018,38(4):82-86

    CHEN J,SONG H,DAI Y,et al. Wear and corrosion properties of cold sprayed 420 stainless steel/WC-17Co coating on magnesium alloy[J]. Journal of Aeronautical Materials,2018,38(4):82-86.)
    [19] 曾小勤,史枭颖. 稀土镁合金强韧性设计与开发[J]. 航空材料学报,2017,37(1):18-25

    ZENG X Q,SHI X Y. Strengthening and toughening design and development of Mg-rare earth alloys[J]. Journal of Aeronautical Materials,2017,37(1):18-25.)
    [20] JACKSON J H,FROST P D,LOONAM A C. Magnesium-lithium base alloys-preparation, fabrication, and general characteristics[J]. Journal of Metals,1949,2:149-168
    [21] JACKSON R J, FROST P D. Properties and current applications of magnesium lithium alloys[C]∥Washington DC: NASA SP-5068, 1967.
    [22] JIANG B,YIN H M,YANG Q S,et al. Effect of stannum addition on microstructure of as-cast and as-extruded Mg-5Li alloys[J]. Transactions of Nonferrous Metals Society of China,2011,21(11):2378-2383 doi: 10.1016/S1003-6326(11)61023-6
    [23] CAO F R,DING H,WANG Z D,et al. Quasi-superplasticity and deformation mechanism of ultralight beta solid solution Mg-11Li-3Zn alloy[J]. Acta Metallurgica Sinica,2012,48:250-256
    [24] CAO F R,DING H,LI Y L,et al. Superplasticity, dynamic grain growth and deformation mechanism in ultra-light two-phase magnesium-lithium alloys[J]. Materials Science Engineering: A,2010,527(9):2335-2341 doi: 10.1016/j.msea.2009.12.029
    [25] 马春江,张荻,张国定. 超轻型Mg-Li合金[J]. 宇航材料工艺,1998(2):27-32

    MA C Q,ZHANG D,ZHANG G D. Ultralight Mg-Li alloys[J]. Aerospace Materials and Technology,1998(2):27-32.)
    [26] ZHANG M L,YAN Y D,HOU Z Y,et al. An electrochemical method for the preparation of Mg-Li alloys at low temperature molten salt system[J]. Journal of Alloys and Compounds,2007,440(1/2):362-366 doi: 10.1016/j.jallcom.2006.09.056
    [27] CHEN Z Y,LI Z Q,YU C. Hot deformation behavior of an extruded Mg-Li-Zn-RE alloy[J]. Materials Science Engineering: A,2011,528(3):961-966 doi: 10.1016/j.msea.2010.09.042
    [28] CUI C L,WU L B,WU R Z,et al. Influence of yttrium on microstructure and mechanical properties of as-cast Mg-5Li-3Al-2Zn alloy[J]. Journal of Alloys and Compounds,2011,509:9045-9049 doi: 10.1016/j.jallcom.2011.04.030
    [29] YAN Y D,ZHANG M L,HAN W,et al. Study on the preparation of Mg-Li-Zn alloys by electrochemical codeposition from LiCl-KCl-MgCl2-ZnCl2 melts[J]. Electrochimica Acta,2009,54:3387-3393 doi: 10.1016/j.electacta.2009.01.008
    [30] DONG H W,XU S W,WANG L D,et al. Microstructures and mechanical properties of as-cast and hot-rolled Mg-8.43Li-0.353Ymm(Y-riched mischmetch)alloy[J]. Metallurgical and Materials Transactions A,2012,43:709-715 doi: 10.1007/s11661-011-0888-4
    [31] XU D K,LIU L,XU Y B,et al. The strengthening effect of icosahedral phase on the as-extruded Mg-Li alloys[J]. Scripta Materialia,2007,57:285-288 doi: 10.1016/j.scriptamat.2007.03.017
    [32] YAN H,CHEN R S,HAN E H. Microstructures and mechanical properties of cold rolled Mg-8Li and Mg-8Li-2Al-2RE alloys[J]. Transactions of Nonferrous Metals Society of China,2010,20:550-554 doi: 10.1016/S1003-6326(10)60536-5
    [33] LIU T,Y WANG D,WU S D,et al. Textures and mechanical behavior of Mg-3.3%Li alloy after ECAP[J]. Scripta Materialia,2004,51:1057-1061 doi: 10.1016/j.scriptamat.2004.08.007
    [34] XU D K,HAN E H. Effect of quasicrystalline phase on improving the corrosion resistance of a duplex structured Mg-Li alloy[J]. Scripta Materialia,2014,71:21-24 doi: 10.1016/j.scriptamat.2013.09.025
    [35] XU W Q,BIRBILIS N,SHA G,et al. A high-specific-strength and corrosion-resistant magnesium alloy[J]. Nature Materials,2015,14:1229-1235 doi: 10.1038/nmat4435
    [36] XU D K,LI C Q,WANG B J,et al. Effect of icosahedral phase on the crystallographic texture and mechanical anisotropy of duplex structured Mg-Li alloys[J]. Materials & Design,2015,88:88-97
    [37] XU D K,ZU T T,YIN M,et al. Mechanical properties of the icosahedral phase reinforced duplex Mg-Li alloy both at room and elevated temperatures[J]. Journal of Alloys and Compounds,2014,582:161-166 doi: 10.1016/j.jallcom.2013.08.020
    [38] GUO X Y,WU R Z,ZHANG J H,et al. Influences of solid solution parameters on the microstrucuture and hardness of Mg-9Li-6Al and Mg-9Li-6Al-2Y[J]. Materials & Design,2014,53:528-533
    [39] ZHANG J H,ZHANG L,LENG Z,et al. Experimental study on strengthening of Mg-Li alloy by introducing long-period stacking ordered structure[J]. Scripta Materialia,2013,68:675-678 doi: 10.1016/j.scriptamat.2013.01.023
    [40] CHEN Z Y,LI Z Q,YU C. Hot deformation behavior of an extruded Mg-Li-Zn-RE alloy[J]. Materials Science Engineering: A,2011,528:961-966 doi: 10.1016/j.msea.2010.09.042
    [41] KIM J H,KIM Y H,YOO H S. Effects of Zn and Ca additions on microstructure and mechanical properties of Mg-11Li based alloys[J]. Journal of Nanoscience and Nanotechnology,2016,16:11233-11237 doi: 10.1166/jnn.2016.13484
    [42] PARK G H,KIM J T,PARK H J. Development of lightweight Mg-Li-Al alloys with high specific strength[J]. Journal of Alloys and Compounds,2016,680:116-120 doi: 10.1016/j.jallcom.2016.04.109
    [43] ZHAO J,LI Z Q,LIU W C,et al. Influence of heat treatment on microstructure and mechanical properties of as-cast Mg-8Li-3Al-2Zn-xY alloy with duplex structure[J]. Materials Science Engineering: A,2016,669:87-94 doi: 10.1016/j.msea.2016.05.085
    [44] ZOU Y,L ZHANG H,WANG H T,et al. Texture evolution and their effects on the mechanical properties of duplex Mg-Li alloy[J]. Journal of Alloys and Compounds,2016,669:72-78 doi: 10.1016/j.jallcom.2016.01.174
    [45] BAO L,ZHANG Z Q,LE Q C,et al. Influence of Gd, Nd and Ce additions on microstructures and mechanical properties of ultra-light dual phase Mg-9Li-0.4Zr alloys[J]. Journal of Materials,2016,19:654-658
    [46] SONG Y W,SHAN D Y,CHEN R S,et al. Investigation of surface oxide film on magnesium lithium alloy[J]. Journal of Alloys and Compounds,2009,484:585-590 doi: 10.1016/j.jallcom.2009.04.137
    [47] WU R,YAN Y,WANG G,et al. Recent progress in magnesium-lithium alloys[J]. International Materials Reviews,2015,60:65-100 doi: 10.1179/1743280414Y.0000000044
    [48] YUAN X,YU D J,GAO L L,et al. Effect of phosphate-buffered solution corrosion on the ratcheting fatigue behavior of a duplex Mg-Li-Al alloy[J]. Journal of Materials Engineering and Performance,2016,25:1802-1810 doi: 10.1007/s11665-016-2039-y
    [49] XIANG Q,JIANG B,ZHANG Y X,et al. Effect of rolling-induced microstructure on corrosion behaviour of anas-extruded Mg-5Li-1Al alloy[J]. Corrosion Science,2017,119:14-22 doi: 10.1016/j.corsci.2017.02.009
    [50] ZONG X M,ZHANG J S,LIU W,et al. Effects of Li on microstructures, mechanical, and biocorrosion properties of biodegradable Mg94-xZn2Y4Lixalloys with long period stacking ordered phase[J]. Advanced Engineering Materials,2017,19:1-8
    [51] ZENG R C,QI W C,ZHANG F,et al. In vitro corrosion of Mg-1.21Li-1.12Ca-1Y alloy[J]. Progress in Natural Science: Materials International,2014,24:492-499 doi: 10.1016/j.pnsc.2014.08.005
    [52] ZHOU W R,ZHENG Y F,LEEFLANG M A,et al. Mechanical property, biocorrosion and in vitro biocompatibility evaluations of Mg-Li-(Al)-(RE)alloys for future cardiovascular stent application[J]. Acta Biomaterialia,2013,9(10):8488-8498 doi: 10.1016/j.actbio.2013.01.032
    [53] NENE S S,KASHYAP B P,PRABH U N,et al. Microstructure refinement and its effect on specific strength and bio-corrosion resistance in ultralight Mg-4Li-1Ca(LC41)alloy by hot rolling[J]. Journal of Alloys and Compounds,2014,615:501-506 doi: 10.1016/j.jallcom.2014.06.151
    [54] DOBKOWSKA A,CIESLAK B A,MIZER A J,et al. The corrosion of the microstructure and corrosion resistance of sand cast aluminum alloys[J]. Archives of Metallurgy and Materials,2016,61:209-211 doi: 10.1515/amm-2016-0038
    [55] SONG Y W,SHAN D Y,CHEN R S,et al. Corrosion characterization of Mg-8Li alloy in NaCl solution[J]. Corrosion Science,2009,51:1087-1094 doi: 10.1016/j.corsci.2009.03.011
    [56] XU D K,HAN E H. Effect of quasicrystalline phase on improving the corrosion resistance of a duplex structured Mg-Li alloy[J]. Scripta Materialia,2014,71:21-24 doi: 10.1016/j.scriptamat.2013.09.025
    [57] ZENG R C,SUN L,ZHENG Y F,et al. Corrosion and characterizationof dual phase Mg-Li-Ca alloy in Hank's solution: the influence of microstructuralfeatures[J]. Corrosion Science,2014,79:69-82 doi: 10.1016/j.corsci.2013.10.028
    [58] LEEFLANG M A,DZWONCZYK J S,ZHOU J,et al. Long-term biodegradation and associated hydrogen evolution of duplex-structured Mg-Li-Al-(RE)alloys and their mechanical properties[J]. Materials Science and Engineering: B,2011,176:1741-1745 doi: 10.1016/j.mseb.2011.08.002
    [59] GU M Y,WEI G L,LIU W C,et al. Influence of neodymium on microstructure and corrosion behavior of Mg-8Li-3Al-2Zn alloy[J]. Materials and Corrosion,2017,68:437-443
    [60] GU M Y,WEI G L,LIU W C,et al. Influence of yttrium addition on the corrosion behaviour of as-cast Mg-8Li-3Al-2Zn alloy[J]. Materials Science and Technology,2017,33:864-869
    [61] LV Y Z,LIU M,XU Y,et al. The electrochemical behaviors of Mg-8Li-0.5Y and Mg-8Li-1Y alloys in sodium chloride solution[J]. Journal of Power Sources,2013,239:265-268 doi: 10.1016/j.jpowsour.2013.03.112
    [62] YFANTIS C D, YFANTIS D K, ANASTASSOPOULOU J, et al. Proceedings of the 4th WSEAS conference on environment[C]. Venice, Italy: Ecosystems and Development(EED 06), 2006: 186-189.
    [63] MORISHIGE T,OBATA Y,GOTO T,et al. Effect of Al composition on the corrosion resistance of Mg-14 mass% Li system alloy[J]. Materials Transactions,2016,57:1853-1856 doi: 10.2320/matertrans.M2016247
    [64] MORISHIGE T,UENO K,OKANO Y M,et al. Effect of impurity Fe concentration on the corrosion behavior of Mg-14mass%Li-1mass%Al alloy[J]. Materials Transactions,2014,55:1506-1509 doi: 10.2320/matertrans.MAW201405
    [65] HOU L F,RAVEGGI M,CHEN X B,et al. Investigating the passivity and dissolution of a corrosion resistant Mg-33at.%Li alloy in aqueous chloride using online ICP-MS[J]. Journal of the Electrochemical Society,2016,163:324-329 doi: 10.1149/2.0871606jes
    [66] ESMAILY M,SVENSSON J E,FAJARDO S,et al. Fundamentals and advances in magnesium alloy corrosion[J]. Progress in Materials Science,2017,89:92-193 doi: 10.1016/j.pmatsci.2017.04.011
    [67] KUMAR V. Detection and distribution of lithium in Mg-Li-Al based alloy by ToF-SIMS[J]. Applied Surface Science,2016,388:64-70 doi: 10.1016/j.apsusc.2016.03.160
    [68] 曾荣昌,崔蓝月,柯伟. 医用镁合金: 成分、组织及腐蚀[J]. 金属学报,2018,54:1215-1235 doi: 10.11900/0412.1961.2018.00032

    ZENG R C,CUI L Y,KE W. Medical magnesium alloys: composition, tissue and corrosion[J]. Acta Metallurgica Sinica,2018,54:1215-1235.) doi: 10.11900/0412.1961.2018.00032
    [69] 崔蓝月,吴思思,徐丽粉,等. 镁合金表面层层组装PSS/PAH膜诱导钙磷涂层[J]. 表面技术,2017,46:34-39

    CUI L Y,WU S S,XU L F,et al. Surface layer assembly PSS / PAH film induced calcium phosphate coating on magnesium alloys[J]. Surface Technology,2017,46:34-39.)
    [70] 殷正正,曾荣昌,崔蓝月,等. 医用可降解镁合金表面磷酸盐涂层研究进展[J]. 山东科技大学学报(自然科学版),2017,36:58-70

    YIN Z Z,ZENG R C,CUI L Y,et al. Research progress of surface phosphate coating of medical degradable magnesium alloys[J]. Journal of Shandong University of Science and Technology(Natural Science Edition),2017,36:58-70.)
    [71] BLANDLG,GUSIEVA K,SCULLY J R. Effect of crystallographic orientation on the corrosion of magnesium: comparison of film forming and bare crystal facets using electrochemical impedance and Raman spectroscopy[J]. Electrochimica Acta,2017,227:136-151 doi: 10.1016/j.electacta.2016.12.107
    [72] TAHER I M,DANAIE M,KISH J R. TEM examination of the film formed on corroding Mg prior tobreakdown[J]. Journal of the Electrochemical Society,2014,161:89-94
    [73] SONG G L, GANNON P E. Thesurface films and their possible roles in Mg corrosion[C]. [S.l]: TMS(The Minerals, Metals & Materials Society), 2016: 285-290.
    [74] NOUR I M,LIU Z R,LI D Y,et al. The role of minor yttrium in tailoring the failure resistance of surface oxide film formed on Mg alloys[J]. Thin Solid Films,2016,615:29-37 doi: 10.1016/j.tsf.2016.06.045
    [75] SAMANIEGO A,GUSIEVA K,LIORENT E I,et al. Exploring the possibility of protective surface oxides upon Mg alloy AZ31 via lutetium additions[J]. Corrosion Science,2014,89:101-110 doi: 10.1016/j.corsci.2014.08.015
    [76] YANG J,YIM C D,YOU B S. Effects of Sn in a-Mg matrix on properties of surface films of Mg-xSn(x = 0, 2, 5 wt%)alloys[J]. Materials and Corrosion,2016,67:531-541 doi: 10.1002/maco.v67.5
    [77] WANG J F,LI Y,HUANG S,et al. Study of the corrosion behavior and the corrosion films formed on the surfaces of Mg-xSn alloys in 3.5 wt.% NaCl solution[J]. Applied Surface Science,2014,317:1143-1150 doi: 10.1016/j.apsusc.2014.09.040
    [78] SONG Y W,SHAN D Y,CHEN R S,et al. Investigation of surface oxide filmon magnesium lithium alloy[J]. Journal of Alloys and Compounds,2009,484:585-590 doi: 10.1016/j.jallcom.2009.04.137
    [79] CHO Y,LEE J Y,BOKARE A D,et al. LiOH-embedded zeolite for carbon dioxide capture under ambient conditions[J]. Journal of Industrial and Engineering Chemistry,2015,22:350-356 doi: 10.1016/j.jiec.2014.07.030
    [80] SATYAPA L S,FILBUR N T,TREL A J. Performance and properties of a solid amine sorbent for carbon dioxide removal in space life support applications[J]. Energy & Fuels,2001,15:250-255
    [81] ZHANG Z Y,CHEN K H,NIE F. Effect of magnesium on the electrochemical behavior of lithium anode in LiOH aqueous solution used for lithium-water battery[J]. Electrochimica Acta,2010,55:3830-3837 doi: 10.1016/j.electacta.2010.01.092
    [82] ZHANG Z Y,CHEN W,NIE F,et al. Electrochemical behavior of lithium in lithium hydroxide solution with sodium nitrite[J]. Electrochimica Acta,2012,81:224-226 doi: 10.1016/j.electacta.2012.06.019
    [83] CHEN K H,ZHANG Z Y,NIE F. Effect of adding magnesium to lithium on the performance of discharge and hydrogen evolution of the lithium anode[J]. Journal of Applied Electrochemistry,2010,40:197-204 doi: 10.1007/s10800-009-9995-y
    [84] SUN Q,TIAN H,LI Z Z,et al. Solubility of CO2 in water and NaCl solution in equilibrium with hydrate. Part I: experimental measurement[J]. Fluid Phase Equilibria,2016,409:131-135 doi: 10.1016/j.fluid.2015.09.033
    [85] LIU Y H,HOU M Q,YANG G Y,et al. Solubility of CO2 in aqueous solutions of NaCl, KCl, CaCl2 and their mixed salts at different temperatures and pressures[J]. Journal of Supercritical Fluids,2011,56:125-129 doi: 10.1016/j.supflu.2010.12.003
  • 加载中
图(2) / 表(1)
计量
  • 文章访问数:  5369
  • HTML全文浏览量:  2920
  • PDF下载量:  70
  • 被引次数: 0
出版历程
  • 收稿日期:  2018-11-14
  • 修回日期:  2018-12-16
  • 网络出版日期:  2019-01-21
  • 刊出日期:  2019-02-01

目录

    /

    返回文章
    返回