一种新型超高强铝合金的均匀化工艺研究

陆政;杨守杰;姜海峰;卢健;戴圣龙

航空材料学报 ›› 2001, Vol. 21 ›› Issue (2) : 14-17.

PDF(708 KB)
PDF(708 KB)
航空材料学报 ›› 2001, Vol. 21 ›› Issue (2) : 14-17.
论文

一种新型超高强铝合金的均匀化工艺研究

作者信息 +

A study of homogenization processes for a new type ultra-high strength aluminum alloy

Author information +
文章历史 +

摘要

针对超高强铝合金的特点,从改善合金性能的角度出发,研究了几种均匀化制度。研究发现,两级均匀化优于单级均匀化;400℃短时保温有利于提供合金的综合性能,其原因是促进了Al3Zr粒子的弥散析出,最终细化了亚晶粒所致。研究认为,较好的均匀化制度是400℃/4h+463℃/24h。

Abstract

In order to improve the properties of the ultra-high strength aluminum alloy, some variable homogenization processes were studied. It is found that the two stage homogenizations are better than those of one stage. The properties are improved through the plateau of 400℃, which is explained that it can accelerate the precipitation of Al 3Zr which finning the sub grains. The excellent homogenization process have been determined:400℃/4h+463℃/24h.

关键词

超高强铝合金 / 均匀化 / 退火 / 工艺

Key words

ultra-high strength / homogenization / anneal / process

引用本文

导出引用
陆政, 杨守杰, 姜海峰, 卢健, 戴圣龙. 一种新型超高强铝合金的均匀化工艺研究[J]. 航空材料学报, 2001, 21(2): 14-17
LU Zheng, YANG Shou-jie, JIANG Hai-feng, LU Jian, DAI Sheng-long. A study of homogenization processes for a new type ultra-high strength aluminum alloy[J]. Journal of Aeronautical Materials, 2001, 21(2): 14-17

参考文献

张君尧.铝合金材料的新进展(1)[J].轻合金加工技术,1998,26(5):1.
赵英涛,袁振明.美国大型客机结构用铝合金的发展[J].金属世界,1995(1):16.
杭吕.俄罗斯的航空用高强高韧铝合金[J].航空制造工程,1996(5):19.
PDF(708 KB)

11

Accesses

0

Citation

Detail

段落导航
相关文章

/