胶焊是将点焊技术与胶接技术结合使用的先进连接技术。由于众多优点,该技术越来越受到重视和应用,而其相关研究特别是对其长时蠕变应力的了解比较缺乏。本文利用三维粘弹塑性有限元法,对胶焊连接接头的时间相关应力再分布进行分析,并讨论了相关接头的设计和材料选择的改进方向。
Abstract
Weldbonding is a new joining technique that combines the spot-welding with the adhesive-bonding method. It was adopted more and more in recent years because of its many advantages However, the researches on this new technology are few especially on the long-term stress and strength of the weldbonded structures. A three-dimensional viscoplastic finite element model of single-lap weldbonded joint was developed in this paper to investigate its stress redistribution Some advice on joint design and material choice were discussed.
关键词
胶焊 /
接头 /
粘弹性 /
粘塑性 /
蠕变 /
有限元
{{custom_keyword}} /
Key words
Weldbonding /
Joint /
Viscoelastic /
Viscoplastic /
Creep /
FEM
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
M RING-GROTH, J POWELL, C MAGNUSSON, Weldbonding of stainless steel:An introduction[J]. Journal of Advanced Materials,1998, 30(1):3639.
李春植,戴瑞玲,王玮.粘接点焊单搭接头的静力分析[J].机械强度,1997,19(2):21.
纪东莲、王文先.胶焊技术与胶接接头的设计分析[J].汽车技术,1999,3:19.
GHOSH P K,SAMBASIVARAO N, Weldbonding of thin sheet aluminum[J]. International Journal for the Joining of Materials, 1998, 10(1-2):45-53.
MELANDER A, LARSSON M, STENSIO H, et al. Fatigue performance of weldbonded high strength sheet steels tested in Arctic, room temperature and tropical environments[J]. International Journal of Adhesion and Adhesives, 2000, 20(5):415-425.
常保华,史耀武,董仕节.胶粘剂厚度和弹性模量对胶焊接头应力分布的影响[J].材料工程,1998,5:19.
常保华,史耀武,董仕节.板厚对不同胶粘剂胶焊单搭接头中应力分布影响的数值分析[J].中国机械工程,1999,10(3):341.
常保华,史耀武,董仕节.胶焊搭接接头的应力分布和疲劳行为研究[J].机械工程学报,2000,36(2):106.
殷勇、涂善东.胶接接头力学研究回顾[J].化工机械,2001,4.
SU N, MACKIE R I, Two-dimensional Creep Analysis of Structural Adhesive Joints, Int J. Adhesion and Adhesives, 1992, 13(1):33.
约翰.J.阿克洛尼斯,威廉.J.马克尼特,沈明琦.聚合物粘弹性引论[M].北京:宇航出版社,1984.
何平笙.高聚物的力学性能[M].北京:中国科学技术大学出版社,1997.
Cristescu, I SULICIU. VISCOPLASTICITY[M]. Martinus Nijhoff Publishers, 1982.
ZIENKIEWICZ, O C, CORMEAU, et al. Visco-plasticity-plasticity and creep in elastic solids-a unified numerical solution approach[J]. International Journal for Numerical Methods in Engineering, 1974, 8:821.
贾乃文.粘塑性力学及工程应用[M].北京:地震出版社,2000.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}