采用流变学的方法在RV20型流变仪上研究了不同条件对中性氧化铝悬浮体流变性的影响.重点研究了固含量、分散剂加入量、球磨工艺对料浆流变性的影响.研究表明:随临界固含量的降低,“剪切增厚”的临界剪切速率呈明显的升高趋势,从固含量为56vol%时的82s-1增加到固含量为50vol%时的192s-1;分散剂的加入量对料浆的临界剪切速率具有显著的影响,当固含量为56vol%时,分散剂合适的量为1.0wt%;随着球磨时间的延长,料浆的“剪切增厚”临界剪切速率增大,而且逐渐不再有“剪切变稀”阶段.
Abstract
The rhological properties of Al2O3 water suspensions was examined by means of RV-20 rheometer with rheological method The effects of the solid loading,contents of dispersant and milling time on the rhological properties were studied chiefly The research showed:As the solid loading of the suspension increased,the critical shear rate of the "shear thickening" went down from 192 S-1 to 82 S-1 The dispersant content remarkably affects the suspension's critical shear rate of the "shear thickening" The critical shear rate is higher when the content is 1.0wt% So it can be taken as the appropriate contents of dispersant to the suspension with the solid loading of 56vol% Furthermore,the critical shear rate of the "shear thickening" of the alumina suspension increases with the ball milling time,also the stage of "shear thinning" disappears in long time ball milling.
关键词
氧化铝 /
陶瓷料浆 /
流变性
{{custom_keyword}} /
Key words
Alumina /
ceramic suspension /
rhological propertie
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
MARK A Janney,OMETETE O O.Gelcasting of ceramic powders[P].U S Patent:5145908,1992.
OMETETE O O,MARK A Janney.STREHLOW R A.Gelcasting-A New Ceramic Forming Process[J].Ceram Bull,1991,70(10):1641..
MARK A.Janney.Method for molding ceramic powders[P].U S Patent:4894194.1990.
LANGE,FREDERICK F.VALAMAKANNI,BHASKER V.Method of preparing dense ceramic product[P].U S Patent:5188780,1991.
TIEGS,TERRY N,WITTMER,DALE E.Method of preparing a high solids content,low viscosity ceramic slurry[P].U S Patent:5456877.1994.
Gauckler,Ludwig J,Graule,Thomas.U S Patent:5788891.1996.
陈大明,李斌太,杜林虎,等.中国发明专利:01104148..
陈大明.氧化铝陶瓷基片的水基注凝法低成本制备技术[J],材料导报,2000,14(6):14-15.
SHERRY L.Morissette,Chemorheology of Aqueous-Based Alumina-Poly(rinyl alcohol)Gelcasting Suspensions[J].J Am Ceram Soc,1999,82(3):521-524.
Joseph A.Yanez,et al.,Shear Modulus and Yield Stress Measurement of Attactive Alumina Particle Networks in Aqueous Slurries[J ].J Am Ceram Soc,1996,79(11):2917-1922.
Pirmin C.Hidber,et al.,Citric Acid-A Dispersant for Aqueous Alumina Suspersions[J].J Am Ceram Soc,1996,79(7):1857-1860.
陈大明,李斌太,赵家培,等.陶瓷的凝胶铸成型工艺的研究[A].第九届全国特种陶瓷学术年会论文集[C],1996,泰安.
高家化,沈志坚,丁子上.陶瓷材料的凝胶铸成型方法[J].硅酸盐通报,1993(6):42.
李理,候耀永,等.高分散,高稳定α-Al2O3和纳米SiC混合水悬浮液的制备[A].第九届全国特种陶瓷学术年会论文集[C],1996,泰安.
BARNES,J HUTTON F;WALTERS K(英).流变学导引[M].北京:中国石化出版社,1992.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}