采用等温恒应变速率压缩试验对7A60超高强度铝合金的流动应力进行了研究。试验结果表明,该合金流动应力随着变形温度的升高而下降,随着应变速率的增加而增加。通过对试验数据的数理统计分析,确定了该合金流动应力对应变速率和变形温度敏感,对应变的变化不敏感。应变速率和变形温度是影响该合金流动应力的关键因素,从而也是变形工艺控制的主要因素。
Abstract
The flow stress of 7A60 ultra high strength aluminum alloy was studied by isothermal compress test at constant strain rate. The results showed that the flow stress of this alloy reduced with increasing deform temperature and increased with increasing strain rate. Based on experimental data analysis, it was concluded that the dominant factors affecting flowing stress were the strain rate and deforming temperature, and the two parameters were also important for deforming process control.
关键词
超高强度铝合金 /
流动应力 /
热模拟试验 /
变形温度 /
应变速率
{{custom_keyword}} /
Key words
ultra high strength /
flow stress /
hot simulation /
deform temperature /
strain rate
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
张君尧.铝合金材料的新进展(1)[J].轻合金加工技术,1998,26(5):59-62.
李成功,傅恒志,于翘,等. 航空航天材料[M]. 北京:国防工业出版社,2002.125-248.
DESANCTIS M.Structure and properties of rapidly solidified ultrahigh strength Al-Zn-Mg-Cu alloys produced by spray deposition[J].Materials Science Engineering A,1991,141(1):103-121.
索姆普桑 D S. 国外近代变形铝合金专集[M]. 洪仁先,译.北京:冶金工业出版社,1987.144-184.
曾渝,尹志民,潘青林,等.超高强铝合金的研究现状及发展趋势[J].中南工业大学学报,2002,33(6):592-596.
盛骤,谢式千,潘承毅.概率论与数理统计[M].北京:高等教育出版社,1993.241-279.
高允彦.正交及回归试验设计方法[M].北京:冶金工业出版社,1988.70-129.
罗子健,俞汉清,郭乃成. 金属塑性成形原理[M].西安:西北工业大学出版社,1988.47-79.
科尔涅耶夫НИ,斯库加列夫ИГ.金属压力加工的物理化学理论基础[M].北京:国防工业出版社, 1965.234-277.
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}