碳纤维表面处理及其对碳纤维/聚芳基乙炔复合材料力学性能的影响

刘丽; 傅宏俊; 黄玉东; 杨明

PDF(693 KB)

航空材料学报 ›› 2005, Vol. 25 ›› Issue (2) : 59-62.

扫码查看或转发全文

论文

碳纤维表面处理及其对碳纤维/聚芳基乙炔复合材料力学性能的影响

刘丽;傅宏俊;黄玉东;杨明

作者信息 +

Surfacial Modification for Carbon Fiber and Its Effect on the Mechanical Property of CF/PAA

LIU li;FU Hongjun;HUANG Yudong;YANG Ming

Author information +

文章历史 +

摘要

聚芳基乙炔(PAA)是一种新型的热防护材料,但PAA为非极性树脂,作为基体材料使用时存在着化学结构惰性,不易润湿增强体———碳纤维(CF)的缺点。为此,本工作对CF采用表面氧化处理后接枝丙烯酸的改性方案,研究与非极性基体相匹配的界面特性。结果表明,阳极氧化处理增加了纤维表面的极性官能团,提高了与丙烯酸的接枝反应能力,从而在碳纤维表面引入了与PAA相似的双键结构,有利于改善CF/PAA复合材料的界面结合,使碳纤维/PAA复合材料的力学性能大幅度提高。

Abstract

Polyarylacetylene (PAA) is a new kind of thermal protection material, however there are some disadvantages due to its non-polar characteristics when it is used as the matrix resin, such as inertia structure make it hard to impregnate carbon fiber. So the grafting method after anodic oxidation was used to treat carbon fiber so as to investigate the suitable interface for the non-polar matrix. Results show that the polar functional groups on the surface of carbon fiber increase after anodic oxidation treating so as to enhance the reaction of carbon fiber with the acrylic acid and import double-bond which is similar to the structure of PAA. The double-bond imported on the surface of CF will be benefit to improve the interface adhesion of CF/PAA composites and increase the mechanical properties of CF/PAA composites.

导出引用

刘丽;傅宏俊;黄玉东;杨明. 碳纤维表面处理及其对碳纤维/聚芳基乙炔复合材料力学性能的影响[J]. 航空材料学报, 2005, 25(2): 59-62

LIU li;FU Hongjun;HUANG Yudong;YANG Ming. Surfacial Modification for Carbon Fiber and Its Effect on the Mechanical Property of CF/PAA[J]. Journal of Aeronautical Materials, 2005, 25(2): 59-62

参考文献

闫联生,姚冬梅,闫桂沈,等.碳布增强聚芳基乙炔新型放热材料[J].玻璃钢/复合材料,1999(5):20-23.
张德雄,张衍.高温复合材料基体树脂聚芳基乙炔综述[J].固体火箭技术,2001,24(1):53-59.
焦扬声,庄严其.热防护材料的新进展--芳基乙炔共聚物的碳纤维增强材料[J]. 玻璃钢/复合材料,1997(1):41-43.
陈继荣,张衍,庄元其,等.高碳树脂--聚芳基乙炔(PAA)[J].玻璃钢/复合材料,1998(1):15-16.
FUKUNAGA A, UEDA S,NAGUMO M.Air-oxidation and anodization of pitch-based carbon fibers[J].Carbon, 1999, 37(7):1081-1085.
HUANG Y D, CAO H L,ZHANG Z Q.Effect of anodic oxidation treatment for three dimentional carbon fibre braided fabric on properties of its composites[J].Materials Science and Technology, 2001, 17:1459-1464.
CHOI M H, JEON B H, CHUNG I J.The effect of coupling agent on electrical and mechanical properties of carbon fiber/phenolic resin composites[J]. Polymer,2000,41:3243-3252.
LI R, YE L, MA Y W. Application of plasma technologies in fibre-reinforced polymer composites:a review of recent developments[J].Composites, Part A,1997,28(1):73-86.