表面处理层疲劳损伤过程的数值跟踪研究

吴维青;阮玉忠

航空材料学报 ›› 2005, Vol. 25 ›› Issue (5) : 59-62.

PDF(805 KB)
PDF(805 KB)
航空材料学报 ›› 2005, Vol. 25 ›› Issue (5) : 59-62.
论文

表面处理层疲劳损伤过程的数值跟踪研究

作者信息 +

Damage Process of Surface-treatent Coating under Fatigue Loading

Author information +
文章历史 +

摘要

用系统分析的方法定义疲劳损伤参数,通过三点弯曲疲劳试验,结合扫描电镜等观测手段,定量跟踪了三种表面处理镀层在循环载荷作用下疲劳损伤的产生与发展过程。试验结果表明:在循环加载过程中,因基体材料产生表面滑移塑性变形,三种表面处理镀层都以不断开裂的损伤方式发展。磷化膜层表现为在比较长的循环周期里产生连续的疲劳损伤过程;晶化镍磷化学镀层和铁镍磷合金电镀层则在较短的循环周期里大规模开裂,磷化膜在疲劳损伤过程中呈现出一定的韧性。试验结果还显示:三种表面处理层都是在循环载荷作用到一定的循环周数才开始开裂,说明表面处理层都有一定的疲劳强度。

Abstract

The effects of phosphate coating、electoless Ni-P coating heat treated at 400℃ and electrodeposited Fe-Ni-P alloy coating on fatigue property have been examined by three-point cyclic bending test.The damage processs of the surfacetreating coatings has been investigated by system analysis method.The results reveal that the fatigue damage of the phosphate coating is a continual process and the fatigue damage of electoless Ni-P coating and electrodeposited Fe-Ni-P alloy coating are a short process.The results also show that the crack of coatings initiates when the slip bands occur on the surface of base steel,and the system analysis method is effective in the surface fatigue damage detecting.

关键词

系统分析 / 表面处理 / 疲劳损伤

Key words

system analysis / surface-treating / fatigue damage

引用本文

导出引用
吴维青, 阮玉忠. 表面处理层疲劳损伤过程的数值跟踪研究[J]. 航空材料学报, 2005, 25(5): 59-62
WU Wei-qing, RUAN Yu-zhong. Damage Process of Surface-treatent Coating under Fatigue Loading[J]. Journal of Aeronautical Materials, 2005, 25(5): 59-62

参考文献

吴纯素.化学转化膜[J].北京:化学工业出版社,1988.
苟文选.30CrMnSiA材料疲劳损伤的激光检测及其细观机理[J].应用力学学报,1998,15(1):79-86.
叶笃毅.结构钢表面疲劳损伤演化过程的显微硬度研究方法[J].钢铁研究学报,1998,10(6):52-55.
SURESH S.材料的疲劳[M].北京:国防工业出版社,1993.
GLISSON T H.系统分析导论[M].长沙:湖南大学出版社,1987.
DOBSON S,NOORI M,HOU Z,et al.Modeling and random vibration analysis of SDOF system with asymmetric hysteresis[J].Int J Non-linear Mechanics,1970,32(4):669-680.
付丽强,林桐,吴维青.神经网络在材料疲劳寿命预测中的应用[J],福州大学学报,2001,29(5):57-60.
孙冬柏,俞宏英,杨德钧.短时间热处理后镍磷合金镀层的性能[J],金属热处理,1999,(总257):7-9.
康翠荣,孟庆英,杨治安,等.钢铁表面锌系磷化膜的研究[J],电子显微学报,1995,(15):350-353.
高诚辉.铁-镍-磷合金电镀的研究[J].材料保护,1990.7.
吴维青.经镍磷化学镀处理40Cr钢疲劳损伤跟踪监测[J],中国有色金属学报2002,12(1):200-205.
吴维青,戴品强.疲劳损伤的一种监测方法[J],兵器材料科学与工程,2002,25(2),55-57.
吴维青.40Cr钢的三点弯曲疲劳损伤在线跟踪测量[J],机械强度,2003,25(4):456-458.
吴维青.40Cr钢疲劳裂纹萌生寿命的测量[J],应用力学学报,2003,20(3):141-144.
康翠荣,孟庆英,杨治安,等.锌系磷化膜的电子显微结构分析[J],天津大学学报,1996,29(5),740-744.
PDF(805 KB)

19

Accesses

0

Citation

Detail

段落导航
相关文章

/