低成本聚硅氧烷制备SiCf/Si-O-C材料性能研究

范真祥;程海峰;张长瑞;唐耿平;楚增勇;王军

航空材料学报 ›› 2006, Vol. 26 ›› Issue (2) : 52-56.

PDF(575 KB)
PDF(575 KB)
航空材料学报 ›› 2006, Vol. 26 ›› Issue (2) : 52-56.
论文

低成本聚硅氧烷制备SiCf/Si-O-C材料性能研究

  • 范真祥;程海峰;张长瑞;唐耿平;楚增勇;王军
作者信息 +

Study of Properties of Silicon Carbide Fiber Reinfoced Si-O-C Composites Using Low Cost Polysiloxane

  • FAN Zhen-xiang;CHENG Hai-feng;ZHANG Chang-rui;TANG Geng-ping;CHU Zeng-yong;WANG Jun
Author information +
文章历史 +

摘要

以聚硅氧烷为先驱体,采用先驱体转化法制备SiCf/Si-O-C复合材料,同时测试所得复合材料的弯曲强度、韧性、剪切强度、密度、热膨胀系数、导热系数、耐烧蚀性能。结果表明,SiCf/Si-O—C复合材料具有良好的综合性能。对所得材料微观结构进行分析讨论,发现界面结构与致密度是SiCf/Si-O-C复合材料具有高性能的主要原因。

Abstract

Silicon carbide fiber reinforced siliconoxycarbide(Si-O-C) composites were fabricated via precursor infiltration and pyrolysis using polysiloxane.Flexural strength, tensile strengths, shear strength, dentsity, thermal expansion coefficient, thermal conduction coefficient, ablative properties of SiCf/Si-O-C composites were tested .The results indicated that SiCf/Si-O-C composites had fairly excellent properties.Microstructure and properties of SiCf/Si-O-C composites was discussed, the high properties were mainly attributed to ideal interface structure and density.

关键词

Si-O-C / 聚硅氧烷 / 先驱体转化 / 陶瓷基复合材料 / 烧蚀性能

Key words

silicon oxycarbide / polysiloxane / precursor infiltrati / ceramic matrix compo / ablative property

引用本文

导出引用
范真祥;程海峰;张长瑞;唐耿平;楚增勇;王军. 低成本聚硅氧烷制备SiCf/Si-O-C材料性能研究[J]. 航空材料学报, 2006, 26(2): 52-56
FAN Zhen-xiang;CHENG Hai-feng;ZHANG Chang-rui;TANG Geng-ping;CHU Zeng-yong;WANG Jun. Study of Properties of Silicon Carbide Fiber Reinfoced Si-O-C Composites Using Low Cost Polysiloxane[J]. Journal of Aeronautical Materials, 2006, 26(2): 52-56

参考文献

徐永东,成来飞,张立同.三维碳化硅/碳化硅陶瓷基编织体复合材料[J].无机材料学报,2001,2(16):344-348.
SCHOLZ R,DOS SANTOS MARQUES.Electrical conductivity of silicon carbide composite and fibers[J].Journal of Nuclears,2002,307-311:1098-1101.
MIRIYALA N,LIAW P K.The mechanical behavior of a Nicalon/SiC composite at room temperature and 1000℃[J].Journal of Nuclears,1998,253:1-9.
MA Qing-song,CHEN Zhao-hui.Processing and characterization of three-dimensional carbon fiber reinforced Si-O-C composite via precursor pyrolysis[J].Material Science and Engineering,2003,A352:213-216.
马青松,陈朝辉.聚硅氧烷/二乙烯基苯的交联与裂解[J].国防科技大学学报,2001,23(5):40-44.
LEE S P,PARK J S.Process,microstructure and flexural propertises of reaction sintered Tyranno SA/SiC composites[J].Journal of Nuclear Materials,2002,307-311:1191-1195.
YASMIN A,BOWEN P.Fatigue behavior of cross-ply Nicalon/CAS-Ⅱ glass-ceramic matrix composites at room and elevated temperatures[J].Composites:Part A,2004,35:83-94.
RICE R W.Effects of amount,location,and character of porosity on stiffness and strength of ceramic fiber composites via different processing[J].Journal Materials Science,1999,34(12):2769-2772.
PDF(575 KB)

14

Accesses

0

Citation

Detail

段落导航
相关文章

/