原位合成TiC/Ti基复合材料氧化行为

覃业霞;朱建勇;吕维洁;徐栋;覃继宁;张荻

航空材料学报 ›› 2006, Vol. 26 ›› Issue (4) : 105-109.

PDF(643 KB)
PDF(643 KB)
航空材料学报 ›› 2006, Vol. 26 ›› Issue (4) : 105-109.
论文

原位合成TiC/Ti基复合材料氧化行为

作者信息 +

Oxidation Kinetics of in Situ Synthesized TiC/Ti Matrix Composites at Elevated Temperature

Author information +
文章历史 +

摘要

研究了TiC/Ti基复合材料在550℃,600℃和650℃空气中恒温氧化行为。分析了增强体TiC对钛基复合材料氧化动力学行为的影响,并用X射线衍射仪(XRD)和配有能谱仪(EDS)的扫描电子显微镜(SEM)对氧化层表面的相组成、形貌以及氧化层剖面的显微结构进行了分析。结果表明:TiC/Ti基复合材料的氧化层由金红石型的氧化物TiO2组成;增强体TiC能够提高钛基复合材料的抗氧化性,而且随着TiC增强体含量的增加,钛基复合材料的抗氧化性增加;这主要是因为TiC增强体能够促进致密氧化膜的生成。氧化动力学曲线为抛物线类型。

Abstract

The isothermal oxidation behavior of TiC/Ti Matrix Composites(TMCs) at 550℃,600℃ and 650℃ in air was investigated.The reaction products of the oxidation scale were examined by XRD.The surface morphology and cross-section microstructure of the oxidation scale were analyzed by SEM.An oxidation scale was mainly consisted of rutile-TiO2.The addition of TiC can improve the oxidation resistance of TMCs.Moreover,the increase percentage of TiC reinforcements can decrease the overall oxidation rate of TMCs at 550,600,and 650℃.It is attributed to the formation of thin and dense oxidation.The isothermal oxidation kinetic curves mainly follow parabolic rate law.

关键词

原位合成 / TiC/Ti基复合材料 / 氧化 / 氧化动力学

Key words

in situ synthesized / (TiB+TiC)/Ti Matrix / high temperature oxi / oxidation kinetic

引用本文

导出引用
覃业霞, 朱建勇, 吕维洁, 徐栋, 覃继宁, 张荻. 原位合成TiC/Ti基复合材料氧化行为[J]. 航空材料学报, 2006, 26(4): 105-109
QIN Ye-xia, ZHU Jian-yong, LU Wei-jie, XU Dong, QIN Ji-ning, ZHANG Di. Oxidation Kinetics of in Situ Synthesized TiC/Ti Matrix Composites at Elevated Temperature[J]. Journal of Aeronautical Materials, 2006, 26(4): 105-109

参考文献

WANJARA P,YUE S,DREW R A L,et al.Titanium based composites produced by powder metallurgy[J].Key Engineering Materials,1997,127-131:415-422.
ABKOWITZ S,.ABKOWITZ S M.Particulate reinforced titanium alloy composites economically formed by powder metallurgy[J].Industrial Heating,1993,60 (9):32-37.
ZHANG E L,ZENG G,ZENG S Y.Effect of in situ TiB short fibre on oxidation behavior of Ti-6Al-1.2B alloy[J].Scripta materialia,2002,46:811-816.
VELASCO B G,ASWATH P B.Microstructural stability,microbardness and oxidation behavior of in situ reinforced Ti-8.5Al-1B-1Si (wt%)[J].Journal of materials science,1998,33:2203-2214.
LU W J,ZHANG D,Zhang XN,et al.Microstructure characterization of TiC in in situ synthesized titanium matrix composites prepared by common casting technique[J].Journal of Alloys and Compounds,2001,327(1-2):248-252.
ZHANG X N,LU W J,ZHANG D,et al.In situ technique for synthesizing (TiB+ TiC)/Ti composites[J].Scripta Materialia,1999,41 (1):39-46.
LU W J,ZHANG D,ZHANG X N,et al.Creep fracture life of in situ synthesized (TiB+ TiC)/Ti composites[J].Scripta Materialia,2001,44(10):2449-2455.
MAJUMDARJD,MORDIKEBL,ROYSK,et al.High-temperature oxidation behavior of laser-surface-alloyed Ti with Si ans Si+ Al[J].Oxidation of metals,2002,57 (5/6):473-498.
陈绍楷,张廷杰,曾泉浦.Ti/TiCp复合材料界面相Ti2C中C空位的有序结构[J],稀有金属材料科学与工程,1994,23(2):30-38.
VELASCO B G,ASWATH P B.Microstructural stability,microhardness and oxidation behavior of in situ reinforced Ti-8.5Al-1B-1Si (wt%)[J].Journal of Materials Science,1998,33:2203-2214.
KEKARE S A,TONEY J B,ASWATH P B.Oxidation of ductile particle reinforced Ti-48Al composites[J].Metallurgical and Materials Transactions A,1995,26:1835-1845
GURRAPPA I,GOGIA A K.High performance coatings for titanium alloys to protect against oxidation[J].Surface and Coatings Technology,2001,139:216-221
化学工业部力学性能研究室.腐蚀与防护手册[M].北京:化学工业出版社,1989.

基金

全国博士学位论文作者专项资金资助(200332);上海市科委重大基础研究项目(04DZ14002)
PDF(643 KB)

15

Accesses

0

Citation

Detail

段落导航
相关文章

/