热塑弹性体铝合金化学铣切保护涂料的研制

王云英; 孟江燕; 林翠

PDF(215 KB)

航空材料学报 ›› 2006, Vol. 26 ›› Issue (5) : 70-72.

扫码查看或转发全文

论文

热塑弹性体铝合金化学铣切保护涂料的研制

作者信息 +

Preparation of Thermoplastic Elastmer Protect Coating for Chemical Milling of Aluminum Alloy

Author information +

文章历史 +

摘要

采用热塑性弹性体为基体材料制备不同配方的铝合金化学铣切保护涂料。实验包括涂料中酚醛树脂的合成,涂料的制备。所做涂料的性能考核包括外观、粘度、固体含量、抗张性、断裂伸长率、浸蚀比、致密性、剥离强度等。最后与美国同类产品性能对比。研究表明,自制的铝合金化学铣切保护涂料的涂膜透明均匀、剥离强度大小适中、耐强碱,满足化学铣切工艺要求,也基本上与美国同类产品性能相当。

Abstract

This study adopted thermoplastic elastmer as the base material of protect coating for chemical milling of aluminum alloy.The experiment included synthesis of PF resin;preparation of protective coating with different kinds of formula;analysis of the performances of protective coating: such as appearance,viscosity,solid content,tensility,rupture elongation ratio,etching ratio,compatibility,peel ability and so on.Finally,the performance of the protect coating is compared with that of the similar products of the USA.Experiment proves that characteristics of the self-produced protective coating,such as transparent uniform film,proper peel strength,perfect aldaline resistance,meets the requirements of chemical milling,approaches that of American products basically.

导出引用

王云英, 孟江燕, 林翠. 热塑弹性体铝合金化学铣切保护涂料的研制[J]. 航空材料学报, 2006, 26(5): 70-72

WANG Yun-ying, MENG Jiang-yan, LIN Cui. Preparation of Thermoplastic Elastmer Protect Coating for Chemical Milling of Aluminum Alloy[J]. Journal of Aeronautical Materials, 2006, 26(5): 70-72

参考文献

威廉T哈里斯.化学铣切[M].北京:国防工业出版社,1983.
战凤昌,李悦良.专用涂料[M].北京:化学工业出版社,1988.
刘国杰.特种功能性涂料[M].北京:化学工业出版社,2002.
航空制造工程手册总编委员会.航空制造工程手册·特种加工[M].北京:航空工业出版社,1993.
TAKASAKI A,FURUYA Y.Hydrogen evolution from chemically etched titanium aluminides[J].Journal of Alloys and Compounds,1996,243(1～2):167-172.
COGGINS D L,LOUIS S,GUMBELEVICIUS J,et al.Chem-milling of titanium and refractory metals[P] U.S.P.4116755,1977.
CARPMAELS,RANSFORD.Chemical milling process and bath therefore.[P].U K.P.1304043,1973.
杨德等.橡胶型可剥掩蔽涂料的研制和应用,[J].现代涂料与涂装,2004(3):14-15.
杨海燕,陆联弟,王家颖,等.HX-01A化学铣切保护胶的应用[J].化学工程师,1998,(4):48～49.
金关泰.丁苯嵌段共聚物在粘胶剂中的应用[J].粘合剂,1984,(4):17-23.
G.霍尔登,N.R.莱格,R.夸克,H.E.斯罗德主编,热塑性弹性体[M].北京:化学工业出版社,2000年,P579.
MORTON:Anionic Polymerization:Principles and Practice(1983)[N].Academic Press,Now York.
MCGRATH J.E(Ed.),Anionic Polymerization.Kinetics Mechanics and Synthesis,ACS Symposium Series[C].No.166(1981)American Chemical Society,Washington D.C
N.R.Legge,et al.In Applied Polymer Science,2nd edit.[M] ACS Symposium Series No.285(1985)American Society,Washington D.C.
刘国杰,特种功能涂料,[M] 化学工业出版社,2002.7.
橡胶工业手册编写小组.橡胶工业手册(第一、二、三册)有[M].北京:石油化工出版社,1976.