疲劳损伤对3D C/SiC复合材料裂纹分布的影响

张钧;栾新刚;张立同

航空材料学报 ›› 2009, Vol. 29 ›› Issue (5) : 94-98.

PDF(855 KB)
PDF(855 KB)
航空材料学报 ›› 2009, Vol. 29 ›› Issue (5) : 94-98.
论文

疲劳损伤对3D C/SiC复合材料裂纹分布的影响

作者信息 +

Effect of Fatigue Damage on Distribution of Cracks in 3D C/SiC Composites

Author information +
文章历史 +

摘要

采用χ2拟合优度检验方法对疲劳试验前后3D C/SiC复合材料基体和涂层裂纹分布规律进行研究。结果表明,原始试样中3D C/SiC复合材料基体和涂层裂纹间距分别服从分布函数为N(143.75,56.782)和N(562.59,100.092)的正态分布,疲劳后基体和涂层裂纹间距分别服从分布函数为N(105.48,29.162)和N(227.89,25.232)的正态分布。疲劳可以促使新裂纹的产生,但不能改变基体和涂层裂纹间距分布的基本特征,这是由3DC/SiC复合材料的编织结构所决定的。

Abstract

χ2 goodness-of-fit test was introduced to investigate the distribution of the cracks on the matrix and the coating of 3D C/SiC composites before and after fatigue testing.The results show that the crack spacing of the matrix and the coating in the as-received composites obey the normal distribution N(143.75,56.782) and N(562.59,100.092),respectively.After fatigue testing,the crack spacing of the matrix and the coating obey the normal distribution N(105.48,29.162) and N(227.89,25.232)),respectively.The distribution regularities are determined by the three dimensional braided structure of the composites.More cracks are brought in the matrix and the coating due to the fatigue stress,but the character of normal distribution is unchanged.

关键词

C/SiC复合材料 / 疲劳 / 裂纹

Key words

C/SiC composites / fatigue / cracks

引用本文

导出引用
张钧, 栾新刚, 张立同. 疲劳损伤对3D C/SiC复合材料裂纹分布的影响[J]. 航空材料学报, 2009, 29(5): 94-98
ZHANG Jun, LUAN Xin-gang, ZHANG Li-Tong. Effect of Fatigue Damage on Distribution of Cracks in 3D C/SiC Composites[J]. Journal of Aeronautical Materials, 2009, 29(5): 94-98

参考文献

张立同,成来飞,徐永东.连续纤维增韧碳化硅陶瓷基复合材料[C]//徐匡迪等.中国科学技术前沿(第6卷).北京:高等教育出版社,2003:305-337.
NASLAIN R.Design,preparation and properties of non-oxide CMCs for application in engines and nuclear reactors:An overview[J].Composites Science and Technology,2004,64(2):155-170.
ROSSO M.Ceramic and metal matrix composites:Routes and properties[J].Journal of Materials Processing Technology,2006,175(1-3):364-375.
VOORDE M H,NEDEL M R.CMCs research in Europe and the future potential of CMCs in industry[J].Ceramic Engineering and Science Proceedings,1996,(3):3-21.
OHNABE H,MASAKI S,ONOZUKA M,et al.Potential application of ceramic matrix composites to aero-engine components[J].Composites Part (A),1999,(30):489-496.
IMUTA M,GOTOH J.Development of high temperature materials including CMCs for space application[J].Key Engineering Materials,1999,164-165:439-444.
吴守军,成来飞,张立同,等.CVD SiC涂层对3D C/SiC氧化行为的影响[J].无机材料学报,2005,20(1):251-256.
LAMOUROUX F,CAMUS G.Oxidation effects on the mechanical properties of 2D woven C/SiC composites[J].Journal of the European Ceramic Society,1994,14 (2):177-188.
LAMOUROUX F,NASLAIN R,JOUIN J M.Kinetics and mechanisms of oxidation of 2D woven C/SiC composites:Ⅱ,Theoretical approach[J].Journal of the American Ceramic Society,1994,77 (8):2058-2068.
NASLAIN R,GUETTE A,REBILLAT F,et al.Oxidation mechanisms and kinetics of SiC-matrix composites and their constituents[J].Journal of Materials Science,2004,39(24):7303-7316.
NASLAIN R.Chemical reactivity in the processing and the interactions with the environment of ceramic matrix composites[J].Solid State lonics,1997,101-103 (2):959-973.
XU Y D,ZHANG L T,CHENG L F.Three-Dimensional Carbon/Silicon Carbide Composites Prepared by Chemical Vapor Infiltration[J].Journal of the American Ceramic Society,1997,80(7):1897-1900.
乔生儒.复合材料细观力学性能[M].西安:西北工业大学出版社,1997:53.
杜双明,乔生儒,纪岗昌,等.3D-C/SiC复合材料在室温和1300℃的拉-拉疲劳行为[J].材料工程,2002,(9):22-25.

基金

国家自然科学基金(No.90716023)资助项目
PDF(855 KB)

8

Accesses

0

Citation

Detail

段落导航
相关文章

/