When simulating the curing process of composites, the specific heat of cured resin was often used as that of the resin during the whole process.This could cause great error in the simulation result.As the heat release of curing reaction, the specific heat of resin during curing was difficult to be measured.A hypothesis was presented that the specific heat of resin changed greatly at the gel point.Before that point the specific heat of uncured resin was linearly lessening to the value of cured resin, while after gel point the specific heat of cured resin was used.The simulation result was in good agreement with the experiment data.
Key words
specific heat /
composite /
curing /
simulation
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
References
杨正林,陈浩然.层合板在固化过程中瞬态温度场及固化度的有限元分析[J].玻璃钢/复合材料,1997(3):3-7.
左德峰,朱金福,黄再兴.树脂基复合材料固化过程中温度场的数值模拟[J].南京航空航天大学学报,1999,31(6):701-705.
JE HOON OH,DAI GIL LEE.Cure cycle for thick glass/epoxy composite laminates[J].Journal of Composite Materials,2002,36(1):19-45.
HOON CHEOL PARK,NAM SEO GOO,KYUNG JAE MIN,et al.Three-dimensional cure simulation of composite structures by the finite element method[J].Composite Structures,2003,62:51-57.
LIU Tian-shu,CHEN Xiang-bao,ZHANG Bao-yan.Study on the cure kinetics of middle temperature curing 3234 epoxy resin system[A].Proceedings of the 5th Pacific Rim International Conference on the Advanced Materials and Processings[C].Materials Science Forum,2005,475-479:1041-1044.
{{custom_fnGroup.title_en}}
Footnotes
{{custom_fn.content}}
PDF(2334 KB)
({{custom_author.role_en}}), {{javascript:window.custom_author_en_index++;}}
