Microstructure Evolution of 2J4 Alloy Deformed by ECAP

DU Zhong-ze;WU Lai-zhi;FU Hanguang;WANG Qing-juan;WANG Jing-tao

Journal of Aeronautical Materials ›› 2008, Vol. 28 ›› Issue (1) : 23-29.

PDF(1343 KB)
PDF(1343 KB)
Journal of Aeronautical Materials ›› 2008, Vol. 28 ›› Issue (1) : 23-29.

Microstructure Evolution of 2J4 Alloy Deformed by ECAP

Author information +
History +

Abstract

The equal channel angular pressing(ECAP) of 2J4 alloy was studied at room temperature with route A in which the sample was not rotated after pressing one pass and entered directly the next pass.The evolution of microstructure of 2J4 alloy after ECAP was investigated by means of optical microscopy(OM) and transmission electron Microscopy(TEM).The results show that the total equivalent true strain of 2J4 alloy is about 3.0 after ECAP,which is corresponding to the depressing amount of 90%.After one pass ECAP,the grain of the alloy changed into the lath martensite of 0.35μm in width and 2.5μm in length from 30μm in diameter.When the deformation pass increased,the martensite refined farther and the lath martensite transformed into the equiaxed grains.Moreover,the amount of α phase increased along with the increase of deformation amount.

Key words

equal channel angula / ultrafine grain / martensite

Cite this article

Download Citations
DU Zhong-ze, WU Lai-zhi, FU Hanguang, WANG Qing-juan, WANG Jing-tao. Microstructure Evolution of 2J4 Alloy Deformed by ECAP[J]. Journal of Aeronautical Materials, 2008, 28(1): 23-29

References

吴东鑫.新型实用传感器应用指南[M].北京:电子工业出版社,1998,55-63.
柯成.金属功能材料词典[M].北京:冶金工业出版社.1999,7-8.
崔忠忻.金属学与热处理原理[M].哈尔滨:哈尔滨工业大学出版社.1998,225-229.
KIM S M,KIM J,SHIN D H,et al.Microstructure development and segment formation during ECA pressing of Ti6Al-4Valloy[J].Scripta Materialia,2004,50(7):927-930.
LANGDON T G,FURUKAWA M,NEMOTO M,et al.Using equal-channel angular pressing for refining grain size[J].JOM,2000,52(4):30-33.
KORCHEF A,NJAH N,MASMOUDI J,et al.Evolution of the mechanical properties of aluminum containing Al8Fe2 Si precipitates during equal channel angular pressing[J].Advanced Engineering Materials,2004,6(8):639-643.
IWAHASHI Y,WANG J,HORITA Z,et al.Principle of equal-channel angular pressing for the processing of ultrafine grained materials[J].Scripta Materialia,1996,35(2):143-146.
FURUKAWA M,IWAHASHI Y,HORITA Z,et al.The shearing characteristics associated with equal-channel angular pressing[J].Materials Science Engineering A,1998,257(2):328-332.
肖纪美.合金相与相变[M].北京:冶金工业出版社,1987,315-353.
徐祖耀.马氏体相变研究的进展和瞻望[J].金属学报(A),1991,27(3),161-172.
吴建新,江伯鸿,徐祖耀.含硼的Cu-Zn-Al合金中母相晶粒度和有序度对Ms的影响[J].金属学报(A),1989,25(2):98-104.
PDF(1343 KB)

11

Accesses

0

Citation

Detail

Sections
Recommended

/