Research on High Temperature Deformation Behavior of New Type Nickel-Based P/M Superalloy

WU Kai; LIU Guo-quan; HU Ben-fu; LI Feng; ZHANG Yi-wen; TAO Yu; LIU Jian-tao

PDF(2036 KB)

Journal of Aeronautical Materials ›› 2010, Vol. 30 ›› Issue (4) : 1-7.

Research on High Temperature Deformation Behavior of New Type Nickel-Based P/M Superalloy

Author information +

History +

Abstract

The high temperature deformation behavior of a new type 3rd generation nickel-based powder metallurgy(P/M) superalloy FGH98Ⅰwas studied in the different deformation temperatures(950～1150℃) and different strain rates(0.0003～1s-1) using Gleeble-1500 thermal simulator.It developed the dynamic RTT curve and established the constitutive relationship of hot deformation.The results show the flow stress decreases with increasing deformation temperature and decreasing strain rate.The flow stress represents as the characteristic of dynamic crystallization with the increasing of strain at the deformation temperature lower than 1100℃ and strain rates higher than 0.0003s-1.The beginning time of dynamic crystallization has no linear relationship with deformation temperatures in the condition of the strain rates lower than 0.01s-1.Besides,the experiments verify that the sinh model including the variable of strain reflects the changing law of flow stress during the hot deformation process.

Key words

nickel-based P/M sup / flow stress / recrystallization / constitutive relatio

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

WU Kai, LIU Guo-quan, HU Ben-fu, LI Feng, ZHANG Yi-wen, TAO Yu, LIU Jian-tao. Research on High Temperature Deformation Behavior of New Type Nickel-Based P/M Superalloy[J]. Journal of Aeronautical Materials, 2010, 30(4): 1-7

References

胡本芙,章守华.镍基粉末高温合金FGH95涡轮盘材料研究[J].金属热处理学报,1997,18(3):28-36.
邹金文,王旭青.FGH96与FGH95粉末高温合金的组织与性能研究[J].材料工程,2002,32(增刊):58-61.
吴凯,刘国权,胡本芙,等.合金元素对新型镍基粉末高温合金的热力学平衡相析出行为的影响研究[J].北京科技大学学报,2009,31(6):722-730.
YUKAMA N,MORINAGA M,MURATA Y,et al.High performance single crystal superalloys developed by the d-electrons concept[C]//DUHL D N,MAURER G,ANTOLOVICH S,et al.Superalloys 1988.Warrendale:TMS,1988:225-234.
GABB T P,O′CONNOR K.High temperature,low strain rate forging of advanced disk alloy ME3[R].NASA/TM-2001-210901.Cleveland:NASA GRC,2001.
HURON E S,BAIN K R,MOURER D P,et al.Development of high temperature capability P/M disk superalloys[C]//REED R C,GREEN K A,CARON P,et al.Superalloys 2008,Pennsylvania:TMS,2008:181-189.
GABB T P,GAYDA J.Forging of advanced disk alloy LSHR[R].NASA/TM-2005-213649.Cleveland:NASA GRC,2005.
刘全坤.材料成形基本原理[M].北京:机械工业出版社,2005.
蔡大勇,熊良银,孙贵东,等.GH708高温合金热变形行为[J].稀有金属材料与工程,2006,35(增刊):144-147.
赵美兰,孙文儒,杨树林,等.GH741变形高温合金的热变形行为[J].金属学报,2009,45(1):79-83.
ALNIAK M O,BEDIR F.Change in grain size and flow strength in P/M Rene 95 under isothermal forging conditions[J].Materials Science and Engineering(B),2006,130:254-263.
THOMASA A,EL-WAHABI M,CABRERA J M,et al.High temperature deformation of Inconel 718[J].Journal of Materials Processing Technology,2006,177:469-472.
MARTIN U,MIIHLE U,OETTEL H.Microstructure and modelling of the deformation behaviour of superalloys at high temperatures[J].Computational Materials Science,1997,9:92-98.
MCQUEEN H J.Development of dynamic recrystallization theory[J].Materials Science and Engineering(A),2004,(387～389):203-208.
SEMIATIN S L,JONAS J J.Formability and workability of metals:plastic instability and flow localization[M].Ohio:American Society for Metals,Metals Park,1984.
许勇顺,柳勇韬,聂明,等.金属热变形应力-应变曲线数学模型的研究与应用[J].应用科学学报,1997,15(4):379-384.
DEBORAH A D.Recovery and Recrystallization in Nickel-based Superalloys[D].Virginia:University of Virginia,2002.
AKBEN M G,JONAS J J.Effects of vanadium and molybdenum addition on high temperature recovery recrystallization and precipitation behavior of Niobium-Based microalloys steels[J].Acta Meterialia,1983,31(1):161-167.
GAROFALO F.An empiral relation defining the stress dependence of minimum creep rate in metal[J].Transaction of AIME,1963,227:3351-3356.
SELLARS C M,MCTEGART W J.On the mechanism of hot deformation[J].Acta Metallurgica,1966,14(9):1136-1138.
SAKAI T,JONAS J J.Dynamic recrystallization:mechanical and microstructural considerations[J].Acta Meterialia,1984,32(2):189-209.
MCQUEEN H J,RYAN N D.Constitutive analysis in hot working[J].Materials Science and Engineering(A),2002,322:43-63.
GRONOSTAJSKI Z J.Model describing the characteristic values of flow stress and strain of brass M63 and aluminium bronze BA93[J].Journal of Materials Processing Technology,1998,78:84-89.
IMBERT C A C,MCQUEEN H J.Peak strength,strain hardening and dynamic restoration of A2 and M2 tool steels in hot deformation[J].Materials Science and Engineering(A),2001,313:88-103.