Study on Diffusion Bonded Titanium Alloy to Stainless Steel with Ni+Nb Interlayers

LI Peng; LI Jing-long; XIONG Jiang-tao; ZHANG Fu-sheng; HUO Li-peng

PDF(1040 KB)

Journal of Aeronautical Materials ›› 2011, Vol. 31 ›› Issue (3) : 46-51.

Study on Diffusion Bonded Titanium Alloy to Stainless Steel with Ni+Nb Interlayers

Author information +

History +

Abstract

Vacuum diffusion bonding between titanium alloy TC4 and austenitic stainless steel 1Cr18Ni9Ti was carried out by using conventional and ladder-like processing methods with Ni+Nb as interlayers.The microstructure and elements distribution of the joints were analyzed by OM,SEM and EDS.The mechanical properties of the joints were characterized by tensile strength test.Meanwhile the fracture surfaces were analyzed too.The results showed that Ni+Nb interlayers successfully prevent the formation of Fe-Ti intermetallic compounds,the microstructures of the transient joint from 1Cr18Ni9Ti to TC4 are Fe-Cr-Ni solid solution,Ni-Nb reaction layer,residual Nb and Nb-Ti solid solution.The weld quality of ladder-like processing joints are superior to the conventional processing joints.The maximum strength of 396MPa at 900℃ was achieved by using ladder-like processing method.The fractures occured on the mixed reaction layer that was formed by Ni3Nb and a small amount Ni6Nb7 between Ni and Nb,and this layer played a crucial role to the joint.

Key words

diffusion bonding / titanium alloy / stainless steel / Ni+Nb interlayers

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

LI Peng, LI Jing-long, XIONG Jiang-tao, ZHANG Fu-sheng, HUO Li-peng. Study on Diffusion Bonded Titanium Alloy to Stainless Steel with Ni+Nb Interlayers[J]. Journal of Aeronautical Materials, 2011, 31(3): 46-51

References

周荣林,张九海,田锡唐.钛/不锈钢相变扩散连接工艺研究[J].焊接,1999,(2):9-12.
KUNDU S,GHOSH M,LAIK A,et al.Diffusion bonding of commercially pure titanium to 304 stainless steel using copper interlayer[J].Materials Science and Engineering A,2005,407(1～2):154-160.
GHOSH M,CHATTERJEE S.Characterization of transition joint of commercially pure titanium to 304 stainless steel[J].Materials Characterization,2002,48(5):393-399.
KUNDU S,CHATTERJEE S.Interfacial microstructure and mechanical properties of diffusion bonded titanium stainless steel joints using a nickel interlayer[J].Materials Science and Engineering A,2006,425(1～2):107-113.
KUNDU S,CHATTERJEE S,OLSON D,et al.Interface microstructure and strength properties of the diffusion-bonded joints of titanium /Cu Interlayer/ stainless steel[J].Metallurgical and Materials Transactions(A),2008,39(9):2106-2114.
KUNDU S,CHATTERJEE S.Interface microstructure and strength properties of diffusion bonded joints of titanium-Al interlayer-18Cr-8Ni stainless steel[J].Materials Science and Engineering A,2010,527(10～11):2714-2719.
HE P,YUE X,ZHANG J H.Hot pressing diffusion bonding of a titanium alloy to a stainless steel with an aluminum alloy interlayer[J].Materials Science and Engineering(A),2008,486(1-2):171-176.
邹茉莲,刘译文.钛合金TC4与1Cr18Ni9Ti不锈钢的扩散焊工艺探索[J].北京航空航天大学学报,1995,21(3):45-50.
霍立鹏,李京龙,李文亚,等.Ni+Cu中间层对TC4与1Cr18Ni9Ti扩散焊接头组织与强度影响[J].稀有金属材料与工程,2008,37(增3):818-820.
HAGIHARA K,NAKANO T,UMAKOSHI Y.Plastic deformation behavior and operative slip systems in Ni3 Nb single crystals[J].Acta Materialia,2000,48(7):1469-1480.
李鹏,李京龙,熊江涛,等.TA2/Ni+Nb中间层/1Cr18Ni9Ti扩散焊接头的组织与性能[J].航空材料学报,2010,30(5):25-29.
黄伯云,李成功,石力开,等.中国材料工程大典(第4卷)[M].北京:化学工业出版社,2006.
虞觉奇.二元合金状态图[M].上海:上海科技出版社,1987.
GHOSH M,CHATTERJEE S.The effect of processing temperature on the structure and properties of the transition joint between Ti alloy and stainless steel[J].Transactions of the Indian Institute of Metals,2003,56(3):197-203.